[Public-List] Damn screws

[Michael Connolly]

George, 
Use a grinding wheel to make your bit fit the offending screw................ Purchase a replaceable tip for a screw driver and grind it to the proper fit....................... Can't do that purchase a drill bit larger than the width of the screw head and grind that down to fit the screw head, chuck into your impact, tool and impact away. 
Michael 


----- Original Message -----

From: "George Dinwiddie via Public-List" <public-list at lists.alberg30.org> 
To: public-list at lists.alberg30.org 
Cc: "George Dinwiddie" <gdinwiddie at alberg30.org> 
Sent: Friday, June 1, 2018 12:35:37 PM 
Subject: Re: [Public-List] Damn screws 

On 6/1/18 12:09 PM, americo silva via Public-List wrote: 
> get a manual impact screwdriver the kind that you hit with a hammer 

I've got one, but the smallest screwdriver tip doesn't fit the screw's slot. 

- George 

-- 
---------------------------------------------------------------------- 
When I remember bygone days George Dinwiddie 
I think how evening follows morn; gdinwiddie at alberg30.org 
So many I loved were not yet dead, http://www.Alberg30.org 
So many I love were not yet born. also see: 
'The Middle' by Ogden Nash http://idiacomputing.com 
---------------------------------------------------------------------- 



_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org