[Public-List] Which caulk for cockpit teak combing joining to fiberglass?
Marcelo D. Gentinetta
vanguard64 at cox.net
Sun Nov 11 18:20:42 PST 2018
Good evening,
On mine, when I took them off last year to varnish, I did away with the caulk by using a self stick D-shaped rubber weatherstripping that I bought at Home Depot. (Frost King D-profile). The weatherstripping is attached to the edge of fiberglass where the coaming rests. So far, it has worked great with no leaks.
Marcelo
Alegría #441
> On Nov 11, 2018, at 6:51 PM, Jonathan Bresler via Public-List <public-list at lists.alberg30.org> wrote:
>
> Randy,
>
> Don't know which caulk to use between the coamings and the deck.
> With you, I am also looking forward to see what is recommended.
>
> Replacing the coamings with teak would be quite expensive.
> So its quite understandable to be looking at other materials.
> Wes Gardner installed "mini" coamings, just enough to fill the
> "shelf" in the fiberglass and mounted the winches directly to the
> side decks. If you search the list archives, expect you will find
> his notes on this.
>
> You might want to consider oak coamings. Oak is much cheaper
> than teak and if sealed well, may last quite a number of years.
>
> Thoughts?
>
> Jonathan
> Rather than Starboard, you might want to
>
> On Sun, Nov 11, 2018 at 7:45 PM Randy Katz via Public-List <
> public-list at lists.alberg30.org> wrote:
>
>> Greetings, All,
>>
>> I finally got my ratty combing boards off the boat. It wasn’t that
>> difficult, but I found plugged screws in the outside quarter round (one at
>> each end, along the deck/combing joint) that went snuggly into the deck. I
>> wondered if this was the original installation.
>>
>> Many layers of chipped, worn Cetol have to go; I’m planning to clean and
>> oil the boards for an easier maintenance regime.
>>
>> I know that when I replace them I’ll need to caulk between the combing and
>> their fiberglass seats, on he outside of the cockpit. I read about butyl,
>> but it seems to degrade in UV. Polysulfide seems likely, a better choice,
>> but which brand/what type?
>>
>> I understand some have replaced the teak with plastic Starboard— any
>> comments about that idea?
>>
>> Many thanks, best Regards,
>>
>> Randy Katz
>> #259 Simple Gifts
>> Seattle/Bellingham
>> --
>>
>> Randall Katz
>> 910 - 32nd Ave.
>> Seattle, WA 98122
>> 206-850-7350
>> 從我的 iPad 傳送
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>
>
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
More information about the Public-List
mailing list