[Public-List] Stern Tube Bedding

Gordon Laco mainstay at csolve.net
Mon Apr 8 10:49:21 PDT 2019


Hello Hernan…

The threads can be restored with complete integrity by filling the holes with epoxy thickened with appropriate fibre…. once cured, drill out the holes a size smaller then run a thread cutting tap in to rethread.

That is quite a secure means of re-establishing your fastenings.

Gordon Laco
SURPRISE 426




> On Apr 8, 2019, at 1:37 PM, Hernán Scarnichia via Public-List <public-list at lists.alberg30.org> wrote:
> 
> The "threads on the keel" stripped out on my boat.
> When I hauled out one of the screws was gone and the other I pulled with my
> fingers.
> In my opinion is not a strong design for a part that can see some
> vibration. But nobody else seems to have had this problem.
> 
> On Mon, Apr 8, 2019 at 7:07 AM Andrew Johns via Public-List <
> public-list at lists.alberg30.org> wrote:
> 
>> Good Morning,
>> In my rapidly snowballing shaft seal project... I have removed the cutlass
>> bearing housing to replace worn bearing.
>> 
>> I removed the bolts holding it to the keel and rotated it with a pipe
>> wrench in an effort to get it to thread from the stern tube.  Unfortunately
>> the whole bearing housing and stern tube assembly came out as one piece.
>> Fortunately its in good shape but the two pieces are hopelessly stuck
>> together.
>> 
>> Looking back though the list it appears Whitby used some sort of caulk to
>> bond in the assembly? Dolponite?  What is the groups thoughts on using 5200
>> to reinstall the stern tube/ bearing housing?
>> 
>> Additionally, should I be worried about the threads in the keel striping
>> out?  It don't appear to have any metal inserts or anything of that sort.
>> 
>> Thanks,
>> Andrew Johns
>> Ecola # 104
>> Colchester VT
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




More information about the Public-List mailing list