[Public-List] Public-List Digest, Vol 3906, Issue 1

Sheldon Shikoluk shikshikoluk at gmail.com
Wed Aug 28 16:41:02 PDT 2019


Where my chain plates went thru the deck there were small pads built-up of
fiberglass. Over the years due to chain plates flexing the opening got
bigger and the pads started to chip away. I first used boatlife caulk to
fill gaps but didn't last and I was getting water intrusion. I decided to
rebuild the pads using west g-flex epoxy and mat and cloth. I built them up
around the chain plates shaped and sanded them then painted with 2part
paint. Been two years and no leaks. Now I know what you are thinking, yes I
did glass the chain plates in but the flexibility of the g flex epoxy
allows for the movement of the chain plates when under load. I did remove
and inspect them first plus I installed new hexhead bolts to the glassed in
knees and bulkhead attachment points. Should I need to ever replace a chain
plates I will use a chisel and hammer to loosen them up.
Sheldon
Rainbow #481


On Wed, Aug 28, 2019, 4:05 PM <public-list-request at lists.alberg30.org>
wrote:

> Send Public-List mailing list submissions to
>         public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
>         public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
>         public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
>    1. Sealants (Ryan)
>    2. Re: Sealants (Mike Lehman)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 28 Aug 2019 13:08:34 -0500
> From: Ryan <rnkiefer at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: [Public-List] Sealants
> Message-ID:
>         <
> CABBm-kFuCa-6RdqS3-ycJ0qgvtbacENSuvf9YPv8cbWFVO+qBQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Hi all,
>
> I'm about to inspect and reseal my chainplates, what do you all use for
> sealant? I've been thinking I would use 3M 4000 UV for its flex, price, and
> UV protection. I had considered Bostik 70-03A but the primer is so
> expensive and it doesn't seem like a common sealant for boats (I heard
> about it on Ocean Navigator but haven't seen it anywhere else).
>
> Thanks!
>
> --
> -Ryan Kiefer
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 28 Aug 2019 15:26:11 -0400
> From: Mike Lehman <mlehman at gmail.com>
> To: A30 Public-List <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Sealants
> Message-ID:
>         <
> CAApdQjrVbp2CaZ0GEAwJhWHgF51v9qYA+oesJ5JREnYubVmOcw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Ryan, I use 3M 4000 UV and have been happy with it. I do it annually.
>
> On Wed, Aug 28, 2019, 3:23 PM Ryan via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > Hi all,
> >
> > I'm about to inspect and reseal my chainplates, what do you all use for
> > sealant? I've been thinking I would use 3M 4000 UV for its flex, price,
> and
> > UV protection. I had considered Bostik 70-03A but the primer is so
> > expensive and it doesn't seem like a common sealant for boats (I heard
> > about it on Ocean Navigator but haven't seen it anywhere else).
> >
> > Thanks!
> >
> > --
> > -Ryan Kiefer
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 3906, Issue 1
> ********************************************
>


More information about the Public-List mailing list