[Public-List] Companionway Hatch

[Rolph and Joan Townshend]

There are two layers of material glued together

On Tue, Feb 26, 2019 at 6:57 PM Jonathan Bresler via Public-List <
public-list at lists.alberg30.org> wrote:

> Good evening,
>
> Looking at the companionway sliding hatch on #262, the top surface shows
> wide slats separated by quite narrow (1/2"?) strips.  The bottom surface
> shows a single joint between each of the wide slats.
>
> What's going on in the middle?  How/why did two joints on the top surface
> become one on the bottom surface.
>
> Jonathan
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>