[Public-List] Vibration

[Winslow Ayer]

No barnacles in Lake Champlain...but I can check. Could the prop be out of balance? Doesn’t seem likely but one never knows.

Winslow

> On Jul 4, 2019, at 9:27 AM, Mike Lehman <mlehman at gmail.com> wrote:
> 
> Like Gord says it is most likely a worn cutlass bearing. Easy to check when the boat is out of the water by wiggling the shaft. If the shaft feels loose, it's probably it. 
> 
> It could also be barncales on the prop.
> 
>> On Thu, Jul 4, 2019, 8:47 AM Winslow Ayer via Public-List <public-list at lists.alberg30.org> wrote:
>> Does anyone have thoughts on why I get a vibration above 1200-1300 rpm’s when motoring? I have a feeling that it may be in the alignment of the shaft but I don’t know.
>> It’s not unbearable but it is annoying (and loud).
>> 
>> Thanks for any advice,
>> 
>> Winslow Ayer 
>> Tinkers Damn #283
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org