[Public-List] Public-List Digest, Vol 3818, Issue 1

Wed Mar 13 08:18:39 PDT 2019

What ever you do, paint or not, use Tefgel on every bit of non-aluminum
hardware that touches the spar.  This will go a loooonnnnggggg way towards
helping to prevent future corrosion and ease removal of hardware later on.

Charles Pleisse
College Park Bicycles
( <http://www.bike123.com>301)864-2211

On Wed, Mar 13, 2019 at 11:07 AM <public-list-request at lists.alberg30.org>
wrote:

> Send Public-List mailing list submissions to
>         public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
>         public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
>         public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
>    1. Re: Natural aluminum finish for mast/boom (Michael Grosh)
>    2. Re: Natural aluminum finish for mast/boom (Michael Grosh)
>    3. Re: Natural aluminum finish for mast/boom (americo silva)
>    4. Re: Natural aluminum finish for mast/boom (Gordon Laco)
>    5. Re: Natural aluminum finish for mast/boom (Christian Douglas)
>    6. Re: Natural aluminum finish for mast/boom (Bill Woodford)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 12 Mar 2019 18:52:02 -0400
> From: Michael Grosh <dickdurk at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Natural aluminum finish for mast/boom
> Message-ID:
>         <CAO99GuHtandiU+3+fFqwYjjtxhTF=
> WmTyw3BK70ocM8HtBJjbQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> aluminum is tough to paint. The oxidation can be considered a protective
> barrier (that is what the anodizing process is as in anodized spars). The
> problem is paint doesn't stick to that well without fairly aggressive
> priming-it's an acid process.
>
> On Tue, Mar 12, 2019, 15:57 Christian Douglas via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I stripped my spreaders last night and just started on the boom. The tops
> > of the spreaders barely had paint left on them. The boom has lots of
> paint
> > flaking off. Looking for recommendations about leaving the aluminum
> > natural. Would I need to get rid of the current oxidation? Does the
> > aluminum need to be treated in any way? Clear coat? Any help on going
> this
> > route would be appreciated.
> >
> > Christian
> > Kittiwake #76
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 12 Mar 2019 18:52:02 -0400
> From: Michael Grosh <dickdurk at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Natural aluminum finish for mast/boom
> Message-ID:
>         <CAO99GuHtandiU+3+fFqwYjjtxhTF=
> WmTyw3BK70ocM8HtBJjbQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> aluminum is tough to paint. The oxidation can be considered a protective
> barrier (that is what the anodizing process is as in anodized spars). The
> problem is paint doesn't stick to that well without fairly aggressive
> priming-it's an acid process.
>
> On Tue, Mar 12, 2019, 15:57 Christian Douglas via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I stripped my spreaders last night and just started on the boom. The tops
> > of the spreaders barely had paint left on them. The boom has lots of
> paint
> > flaking off. Looking for recommendations about leaving the aluminum
> > natural. Would I need to get rid of the current oxidation? Does the
> > aluminum need to be treated in any way? Clear coat? Any help on going
> this
> > route would be appreciated.
> >
> > Christian
> > Kittiwake #76
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 13 Mar 2019 08:29:02 -0400
> From: americo silva <picomar1957 at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Natural aluminum finish for mast/boom
> Message-ID:
>         <
> CAMaMEAAt3xTJVyf44JspM9g8WbgC_4AZWVSXbQPrh5V4FPJ7bA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> get info on airplane painting they have it down pat
>
>
> On Tue, Mar 12, 2019 at 7:02 PM Michael Grosh via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > aluminum is tough to paint. The oxidation can be considered a protective
> > barrier (that is what the anodizing process is as in anodized spars). The
> > problem is paint doesn't stick to that well without fairly aggressive
> > priming-it's an acid process.
> >
> > On Tue, Mar 12, 2019, 15:57 Christian Douglas via Public-List <
> > public-list at lists.alberg30.org> wrote:
> >
> > > I stripped my spreaders last night and just started on the boom. The
> tops
> > > of the spreaders barely had paint left on them. The boom has lots of
> > paint
> > > flaking off. Looking for recommendations about leaving the aluminum
> > > natural. Would I need to get rid of the current oxidation? Does the
> > > aluminum need to be treated in any way? Clear coat? Any help on going
> > this
> > > route would be appreciated.
> > >
> > > Christian
> > > Kittiwake #76
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 13 Mar 2019 08:31:04 -0400
> From: Gordon Laco <mainstay at csolve.net>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Natural aluminum finish for mast/boom
> Message-ID: <023C67ED-A948-4553-8EF2-C7C4A4DF167C at csolve.net>
> Content-Type: text/plain;       charset=utf-8
>
> Yacht painting too?  aluminium is not a problem to paint so long as
> procedures are followed.
>
> Gordon Laco
> www.gordonlaco.com
>
>
>
>
> > On Mar 13, 2019, at 8:29 AM, americo silva via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> > get info on airplane painting they have it down pat
> >
> >
> > On Tue, Mar 12, 2019 at 7:02 PM Michael Grosh via Public-List <
> > public-list at lists.alberg30.org> wrote:
> >
> >> aluminum is tough to paint. The oxidation can be considered a protective
> >> barrier (that is what the anodizing process is as in anodized spars).
> The
> >> problem is paint doesn't stick to that well without fairly aggressive
> >> priming-it's an acid process.
> >>
> >> On Tue, Mar 12, 2019, 15:57 Christian Douglas via Public-List <
> >> public-list at lists.alberg30.org> wrote:
> >>
> >>> I stripped my spreaders last night and just started on the boom. The
> tops
> >>> of the spreaders barely had paint left on them. The boom has lots of
> >> paint
> >>> flaking off. Looking for recommendations about leaving the aluminum
> >>> natural. Would I need to get rid of the current oxidation? Does the
> >>> aluminum need to be treated in any way? Clear coat? Any help on going
> >> this
> >>> route would be appreciated.
> >>>
> >>> Christian
> >>> Kittiwake #76
> >>> _______________________________________________
> >>> These businesses support your Association:
> >>> http://www.alberg30.org/store/A30supporters.html
> >>> Please support them.
> >>> _______________________________________________
> >>> Public-List mailing list
> >>> Public-List at lists.alberg30.org
> >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>>
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 13 Mar 2019 09:05:03 -0400
> From: Christian Douglas <a30kittiwake at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Natural aluminum finish for mast/boom
> Message-ID:
>         <CAOONZk6BHL=
> uwirY9gnhL4nNzJs7cOuMzSnXu_dJUO52QReMkw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I don?t want to paint it. I?m stripping it to leave it natural. Just wanna
> be sure if I need to treat it with something or leave it alone to oxidize
> naturally.
>
> On Wed, Mar 13, 2019 at 08:31 Gordon Laco via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > Yacht painting too?  aluminium is not a problem to paint so long as
> > procedures are followed.
> >
> > Gordon Laco
> > www.gordonlaco.com
> >
> >
> >
> >
> > > On Mar 13, 2019, at 8:29 AM, americo silva via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > get info on airplane painting they have it down pat
> > >
> > >
> > > On Tue, Mar 12, 2019 at 7:02 PM Michael Grosh via Public-List <
> > > public-list at lists.alberg30.org> wrote:
> > >
> > >> aluminum is tough to paint. The oxidation can be considered a
> protective
> > >> barrier (that is what the anodizing process is as in anodized spars).
> > The
> > >> problem is paint doesn't stick to that well without fairly aggressive
> > >> priming-it's an acid process.
> > >>
> > >> On Tue, Mar 12, 2019, 15:57 Christian Douglas via Public-List <
> > >> public-list at lists.alberg30.org> wrote:
> > >>
> > >>> I stripped my spreaders last night and just started on the boom. The
> > tops
> > >>> of the spreaders barely had paint left on them. The boom has lots of
> > >> paint
> > >>> flaking off. Looking for recommendations about leaving the aluminum
> > >>> natural. Would I need to get rid of the current oxidation? Does the
> > >>> aluminum need to be treated in any way? Clear coat? Any help on going
> > >> this
> > >>> route would be appreciated.
> > >>>
> > >>> Christian
> > >>> Kittiwake #76
> > >>> _______________________________________________
> > >>> These businesses support your Association:
> > >>> http://www.alberg30.org/store/A30supporters.html
> > >>> Please support them.
> > >>> _______________________________________________
> > >>> Public-List mailing list
> > >>> Public-List at lists.alberg30.org
> > >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>>
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >>
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 13 Mar 2019 10:30:09 -0400
> From: Bill Woodford <will at woodfordlawgroup.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Natural aluminum finish for mast/boom
> Message-ID:
>         <
> CAGO4MyXJ3-EhzoKW2UC3qN9FHzYmwXMui84tZD_KXVJU2Ld0qg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Once you strip the paint off, I would leave it alone.  The aluminum does
> not need the protection and it will look fine.
>
> Similar to the Japanese motorcycle engines of the 1970s.  The clear coat
> the manufacturer applied on the aluminum engine parts fails and then it
> looks like $*it.
>
>
>
> Woody
>
> US 11 and
> one vintage 1975 Honda CB550F
>
> On Wed, Mar 13, 2019 at 9:05 AM Christian Douglas via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I don?t want to paint it. I?m stripping it to leave it natural. Just
> wanna
> > be sure if I need to treat it with something or leave it alone to oxidize
> > naturally.
> >
> > On Wed, Mar 13, 2019 at 08:31 Gordon Laco via Public-List <
> > public-list at lists.alberg30.org> wrote:
> >
> > > Yacht painting too?  aluminium is not a problem to paint so long as
> > > procedures are followed.
> > >
> > > Gordon Laco
> > > www.gordonlaco.com
> > >
> > >
> > >
> > >
> > > > On Mar 13, 2019, at 8:29 AM, americo silva via Public-List <
> > > public-list at lists.alberg30.org> wrote:
> > > >
> > > > get info on airplane painting they have it down pat
> > > >
> > > >
> > > > On Tue, Mar 12, 2019 at 7:02 PM Michael Grosh via Public-List <
> > > > public-list at lists.alberg30.org> wrote:
> > > >
> > > >> aluminum is tough to paint. The oxidation can be considered a
> > protective
> > > >> barrier (that is what the anodizing process is as in anodized
> spars).
> > > The
> > > >> problem is paint doesn't stick to that well without fairly
> aggressive
> > > >> priming-it's an acid process.
> > > >>
> > > >> On Tue, Mar 12, 2019, 15:57 Christian Douglas via Public-List <
> > > >> public-list at lists.alberg30.org> wrote:
> > > >>
> > > >>> I stripped my spreaders last night and just started on the boom.
> The
> > > tops
> > > >>> of the spreaders barely had paint left on them. The boom has lots
> of
> > > >> paint
> > > >>> flaking off. Looking for recommendations about leaving the aluminum
> > > >>> natural. Would I need to get rid of the current oxidation? Does the
> > > >>> aluminum need to be treated in any way? Clear coat? Any help on
> going
> > > >> this
> > > >>> route would be appreciated.
> > > >>>
> > > >>> Christian
> > > >>> Kittiwake #76
> > > >>> _______________________________________________
> > > >>> These businesses support your Association:
> > > >>> http://www.alberg30.org/store/A30supporters.html
> > > >>> Please support them.
> > > >>> _______________________________________________
> > > >>> Public-List mailing list
> > > >>> Public-List at lists.alberg30.org
> > > >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > >>>
> > > >> _______________________________________________
> > > >> These businesses support your Association:
> > > >> http://www.alberg30.org/store/A30supporters.html
> > > >> Please support them.
> > > >> _______________________________________________
> > > >> Public-List mailing list
> > > >> Public-List at lists.alberg30.org
> > > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > > >>
> > > > _______________________________________________
> > > > These businesses support your Association:
> > > > http://www.alberg30.org/store/A30supporters.html
> > > > Please support them.
> > > > _______________________________________________
> > > > Public-List mailing list
> > > > Public-List at lists.alberg30.org
> > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> --
>
> William Woodford,Esq.
>
> *Woodford Law Group, LLC*
>
> 11 E. Lexington St. - STE 300
>
> Baltimore, MD 21202
>
> 410.928-4774
>
> Fax 410.928-1035
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 3818, Issue 1
> ********************************************
>