[Public-List] Barlow winch parts

[Paul Wilson]

Following up on an old thread. The Barient/Barlow pawl springs are
available from Lewmar. Part #19712056.

On Fri, Dec 28, 2018 at 9:14 AM Michael Connolly <crufone at comcast.net>
wrote:

> Paul,
> Check to see what the spring looks like. I once made a replacement spring
> out of a cut off Bobbie Pin. This was for a small winch on a Typhoon. That
> was 4 years ago and the owner has not had any problems. Check to be sure
> you use the correct lubricant.
> Michael
> > On December 27, 2018 at 7:45 PM Paul Wilson via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> >
> > I have Barlow 24s mounted on the cockpit coamings. I took them off
> > today--along with all the teak for stripping and varnishing. Anyway, I'm
> > giving the winches a thorough servicing and noticed one of the winches
> has
> > a broken pawl spring.
> >
> > I've read on-line that Lewmar pawls and springs are compatible. Can
> anyone
> > confirm? Hutton-Arco will sell you a Barlow NOS set of 4 pawls and 8
> > springs for $38 (Australian) plus an unknown amount for shipping from Oz.
> > http://www.arco-winches.com/products/spares
> >
> > I may just do that--I'm in no hurry. On the hard until March (at least.)
> >
> > Paul / Slainte #129
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>