[Public-List] Spreader/mast bracket

[Greg Hounsell]

I assume it should be a snug fit. On mine the alum tubing had electrical
tape wrapped around the base to make it snug.

I removed that and glued a thin piece if cork inside the base (~1/32 thick)
and that snugged it right up.

Greg
592

On Wed, May 1, 2019, 9:57 PM Christian Douglas via Public-List <
public-list at lists.alberg30.org> wrote:

> May be a dumb question, but when I removed the spreaders last year, there
> was some play in the bracket/spreader connection. Is that correct or should
> spreaders be rigid in that bracket?
>
> Christian
> Kittiwake #76
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>