[Public-List] jib sheet routing

[Mike Lehman]

Greg

If is sheets for the working jib, then they lead inside the shrouds to a
block on the inboard track and then to the primary winch in the cockpit. If
you are using a Genoa, the sheets lead to a block on the outboard track
then to the primary winch in the cockpit.

The rope clutches on the cabin top are for leading halyards to the cockpit.

Hope this helps.


On Tue, May 7, 2019, 8:17 AM Greg Wallis via Public-List <
public-list at lists.alberg30.org> wrote:

> Hi
>
> I am wondering what is the correct route for the jib sheets to get them
> back to the cockpit.  I assume they should be outside the shrouds and then
> come into the boat at some point.
>
> There is an adjustable track on each side of the cabin.  Is this the point
> where the sheets should come into the boat? Should there be a pulley on
> these tracks or does the sheet just go through the eye that moves on the
> track? (seems like alot of friction)
>
> There is some eyes and clutches on top of the cabin. Looks like room for 3
> lines up there. I am pretty sure these would NOT be used for jib sheets,
> correct?
>
> Thanks
> Greg
> hull #165
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>