[Public-List] jib sheet routing
Michael Connolly
crufone at comcast.net
Tue May 7 11:54:57 PDT 2019
Wes,
I see you have added a horizontal "shelf" for your cheek turning blocks. How does that hold up? I see brackets underneath attaching such to your combing. This makes for a nice "seat" for perching oneself more outboard as well? I would think this piece would just rip off the combing? Can you send close-up photos of this arrangement?
Thanks,
Michael
> On May 7, 2019 at 12:11 PM Wes Gardner via Public-List <public-list at lists.alberg30.org mailto:public-list at lists.alberg30.org > wrote:
>
>
> Hi Greg,
>
> Although this picture is a bit distorted, it may give you an idea of how
> the genoa sheets are lead through blocks on the outboard track and then
> back to the primary winches. The rope clutches/sheet stoppers on the top
> of the house could be for a vang, halyards lead back to the cockpit, pole
> lift, etc. I use mine for the vang, the main outhaul, the spinnaker
> halyard and the spinnaker tack line (for an asymmetrical spin).
>
> https://www.dropbox.com/s/qcwwbb06iodtcm0/Side%20View.jpg?dl=0
>
>
> Wes
>
> On Tue, May 7, 2019 at 10:42 AM Mike Lehman via Public-List <
> public-list at lists.alberg30.org mailto:public-list at lists.alberg30.org > wrote:
>
> > > Greg
> >
> > >
> > > If is sheets for the working jib, then they lead inside the shrouds to a
> > block on the inboard track and then to the primary winch in the cockpit. If
> > you are using a Genoa, the sheets lead to a block on the outboard track
> > then to the primary winch in the cockpit.
> >
> > >
> > > The rope clutches on the cabin top are for leading halyards to the cockpit.
> >
> > >
> > > Hope this helps.
> >
> > > >
>
> > > On Tue, May 7, 2019, 8:17 AM Greg Wallis via Public-List <
> > public-list at lists.alberg30.org mailto:public-list at lists.alberg30.org > wrote:
> >
> > >
> > >
> > > > > Hi
> > >
> > > > >
> > > > > I am wondering what is the correct route for the jib sheets to get them
> > > back to the cockpit. I assume they should be outside the shrouds and
> > >
> > > > > then
> >
> > > > > come into the boat at some point.
> > >
> > > > >
> > > > > There is an adjustable track on each side of the cabin. Is this the
> > >
> > > > > point
> >
> > > > > where the sheets should come into the boat? Should there be a pulley on
> > > these tracks or does the sheet just go through the eye that moves on the
> > > track? (seems like alot of friction)
> > >
> > > > >
> > > > > There is some eyes and clutches on top of the cabin. Looks like room for
> > >
> > > > > 3
> >
> > > > > lines up there. I am pretty sure these would NOT be used for jib sheets,
> > > correct?
> > >
> > > > >
> > > > > Thanks
> > > Greg
> > > hull #165
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org mailto:Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > > > > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org mailto:Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > > _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org mailto:Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
More information about the Public-List
mailing list