[Public-List] Sealing chainplates

[Gordon Laco]

Thanks Jonathan - they’re originals…  I’ll stick my head under the tarp and measure to be sure which ones I need...

Gordon Laco
www.gordonlaco.com
#426 Surprise



> On Nov 28, 2019, at 1:57 PM, Jonathan Bresler <262alberg30 at gmail.com> wrote:
> 
> Depends upon the size of your chainplates.  If original or not.
> 
> These are for 1 1/2" (38mm) x 1/4" (6mm) openings
> https://hardware.schaefermarine.com/index.php?main_page=product_info&cPath=147_125&products_id=3549 <https://hardware.schaefermarine.com/index.php?main_page=product_info&cPath=147_125&products_id=3549>
> 
> These are for 1 1/2" (37mm) x 3/8" (9mm) openings
> https://hardware.schaefermarine.com/index.php?main_page=product_info&products_id=3550 <https://hardware.schaefermarine.com/index.php?main_page=product_info&products_id=3550>
> 
> On Thu, Nov 28, 2019 at 1:20 PM Gordon Laco via Public-List <public-list at lists.alberg30.org <mailto:public-list at lists.alberg30.org>> wrote:
> Hello friends,
> 
> I recall a discussion about a Schaeffer fitting which fits over our chainplates were they come up through the deck.
> 
> Does anyone recall the identification SKU of this fitting?
> 
> Gordon Laco
> Surprise 426
> www.gordonlaco.com <http://www.gordonlaco.com/>
> 
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html <http://www.alberg30.org/store/A30supporters.html>
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org <mailto:Public-List at lists.alberg30.org>
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org <http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org>
> -- 
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD