[Public-List] Sealing chainplates

Fri Nov 29 08:44:08 PST 2019

OH   SNAP  !
Good one.  (-:
Rod Friday, 29 November 2019, 10:39a.m. -05:00 from americo silva via Public-List  public-list at lists.alberg30.org :

>Its Like Canadian Metric only cheaper no carbon tax
>
>
>On Fri, Nov 29, 2019 at 9:06 AM Gordon Laco via Public-List <
>public-list at lists.alberg30.org> wrote:
>
> Perfect… thanks
>
> Gordon Laco
> www.gordonlaco.com
>
>
>
>
>> On Nov 29, 2019, at 7:54 AM, mahseer--- via Public-List <
> public-list at lists.alberg30.org> wrote:
>>
>> I made my own raised fitting by using cheap dollar store plastic
> containers. I put resin in the bottom to the height I needed then placed
> them on the deck at each location to create the camber needed.  After the
> resin set popped them out and trimmed to fit.
>>
>> John Boor
>> Past owner
>> MAHSEER #380
>>
>> Sent from my iPad
>>
>>> On Nov 29, 2019, at 6:25 AM, Greg Hounsell via Public-List <
> public-list at lists.alberg30.org> wrote:
>>>
>>> Something similar is on my list this winter.. making some "hockey
> pucks" or
>>> some such to epoxy to the deck.
>>>
>>> Saw one example where someone used ice cube trays then cut the to the
>>> height need leaving nicely rounded edges on them.
>>>
>>> Might try that
>>>
>>> Greg H
>>> #592
>>>
>>>> On Thu, Nov 28, 2019, 4:41 PM Gordon Laco via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>>
>>>> Hi Rod -
>>>>
>>>> I want to make fibre reinforced ‘mounds’ that will augment the existing
>>>> ones through which the chain plates come up through.
>>>>
>>>> I will fix the plates into the tops of the new mounds, and reinforce
> the
>>>> tops with metal plates (I believe in paying for quality but since I
> need
>>>> seven of these, I’ll make my own over the winter)
>>>>
>>>> The purpose of the plates is to limit movement of the parts of the
> plates
>>>> which extend up through the deck, thereby improving the watertight
>>>> integrity of the fittings at the deck.  Despite the plates and what
> they’re
>>>> bolted to being both in good shape, there is enough length above the
>>>> highest bolt that some movement of the chainplates as currently fitted
> is
>>>> inevitable.
>>>>
>>>> My aim is to reduce that movement… to do that, I need to reinforce
> where
>>>> they come through the deck.
>>>>
>>>> Gordon Laco
>>>> www.gordonlaco.com
>>>> Surprise 426
>>>>
>>>>
>>>>
>>>>> On Nov 28, 2019, at 3:41 PM, Rod via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>>>
>>>>>
>>>>> Gord - forgive my " iggorance"  ( maybe it is just that I have not had
>>>> my afternoon coffee yet )  but what are you trying to achieve by adding
>>>> these ?
>>>>> Rod
>>>>> Thursday, 28 November 2019, 01:58p.m. -05:00 from Jonathan Bresler via
>>>> Public-List  public-list at lists.alberg30.org :
>>>>>
>>>>>> Depends upon the size of your chainplates.  If original or not.
>>>>>>
>>>>>> These are for 1 1/2" (38mm) x 1/4" (6mm) openings
>>>>>>
>>>>
> https://hardware.schaefermarine.com/index.php?main_page=product_info&cPath=147_125&products_id=3549
>>>>>>
>>>>>> These are for 1 1/2" (37mm) x 3/8" (9mm) openings
>>>>>>
>>>>
> https://hardware.schaefermarine.com/index.php?main_page=product_info&products_id=3550
>>>>>>
>>>>>>
>>>>>> On Thu, Nov 28, 2019 at 1:20 PM Gordon Laco via Public-List <
>>>>>> public-list at lists.alberg30.org> wrote:
>>>>>>
>>>>>> Hello friends,
>>>>>>
>>>>>> I recall a discussion about a Schaeffer fitting which fits over our
>>>>>> chainplates were they come up through the deck.
>>>>>>
>>>>>> Does anyone recall the identification SKU of this fitting?
>>>>>>
>>>>>> Gordon Laco
>>>>>> Surprise 426
>>>>>> www.gordonlaco.com
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> These businesses support your Association:
>>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>>> Please support them.
>>>>>> _______________________________________________
>>>>>> Public-List mailing list
>>>>>> Public-List at lists.alberg30.org
>>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>>>
>>>>>> --
>>>>>> Jonathan M Bresler
>>>>>> S/V Constance Alberg 30 #262
>>>>>> Annapolis/Eastport MD
>>>>>> _______________________________________________
>>>>>> These businesses support your Association:
>>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>>> Please support them.
>>>>>> _______________________________________________
>>>>>> Public-List mailing list
>>>>>> Public-List at lists.alberg30.org
>>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>> _______________________________________________
>>>>> These businesses support your Association:
>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>> Please support them.
>>>>> _______________________________________________
>>>>> Public-List mailing list
>>>>> Public-List at lists.alberg30.org
>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>_______________________________________________
>These businesses support your Association:
>http://www.alberg30.org/store/A30supporters.html
>Please support them.
>_______________________________________________
>Public-List mailing list
>Public-List at lists.alberg30.org
>http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org