[Public-List] Cabin heaters and cutlass bearing housings.

Jason S kk4mex at gmail.com
Tue Sep 3 06:20:07 PDT 2019


Mine #457 had 2 bolts holding the cutakss housing.
Lots of pics online for different bulkhead mounting configurations.

Good luck
Former owner if #457...wishing i still had her!

On Tue, Sep 3, 2019, 6:43 AM Greg Dawson via Public-List <
public-list at lists.alberg30.org> wrote:

> Dear all
> Just a couple of quick questions for the fleet.
> I recently acquired a Sigmar diesel cabin heater which has a dedicated air
> intake. Does anyone have one on their boat. Do you have fitting
> instructions. I’ve not found anything specific on line. If you have one
> could you send me a few pics of how and where you mounted it please.
>
> My cutlass bearing housing is held on with one bolt at the top and at the
> bottom is what appears to be either a stud or a sheared off bolt? Is this
> right. Just wondering?
> Any help appreciated.
> Greg #348
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


More information about the Public-List mailing list