[Public-List] Cabin heaters and cutlass bearing housings.

[Clay Pass]

You should have two bolts in the bearing housing, one top, one bottom.  The
bottom one has probably corroded off.  Both should be replaced
immediately.  I used bronze bolts.  You may want to reseal as well.

Clay Pass
#449 Seeing Deep

On Tue, Sep 3, 2019 at 6:43 AM Greg Dawson via Public-List <
public-list at lists.alberg30.org> wrote:

> Dear all
> Just a couple of quick questions for the fleet.
> I recently acquired a Sigmar diesel cabin heater which has a dedicated air
> intake. Does anyone have one on their boat. Do you have fitting
> instructions. I’ve not found anything specific on line. If you have one
> could you send me a few pics of how and where you mounted it please.
>
> My cutlass bearing housing is held on with one bolt at the top and at the
> bottom is what appears to be either a stud or a sheared off bolt? Is this
> right. Just wondering?
> Any help appreciated.
> Greg #348
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>