[Public-List] Spreaders

[Dustin Hogard]

Please take me of this list. Sold boat

On Mon, Sep 16, 2019 at 12:49 PM Andrew Johns via Public-List <
public-list at lists.alberg30.org> wrote:

> Hi,
>
> We are getting our boat ready for some extended cruising, with some
> offshore passages in our future.
>
> I a few years ago I replaced the original wood spreaders with epoxy
> laminated white oak.  At the same time, I had cracks welded up in the cast
> aluminum spreader bracket, where the upper flange meets the main portion of
> the casting.  I'm unsure if that was from overtightening or fatigue.
>
> What is the group's consensus on the original wood spreader design?
> Considering our use, I'm unsure if we should stick to the original design,
> reinforce the original design, or retrofit an aluminum spreader?
>
> What have others done?
>
> Thanks,
> Andrew
> #104
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>