[Public-List] Traveller

Gordon Laco mainstay at csolve.net
Sun Apr 26 08:57:45 PDT 2020


I replaced my old plate traveller track with a new X beam one… there is no problem bending to conform to the curve.  I used the bolts on the ends to pull it down with no drama.


Gordon Laco
426 SURRISE
www.gordonlaco.com




> On Apr 26, 2020, at 11:55 AM, Greg Hounsell via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Morning all
> 
> Assuming some variation, does anyone have original mainsheet track length?
> 
> And for those that have replaced it, were you able to have it follow the
> slight crown?
> 
> I have new Barton 24mm I-beam track. Being 28mm tall I'm guessing there's
> not much if any flexibility in it. Has anyone made up a wooden base for one?
> 
> Cheers
> Greg #592
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list