[Public-List] Public-List Digest, Vol 4053, Issue 1

Mon Aug 10 19:16:28 PDT 2020

The reason you cannot just slide it off into the cockpit area is the
fiberglass spine or hump butts against the fore arch of the companion
way hatch.  As you think about re-attaching, I'm open for any more
convenient way to do so.  Trying to screw those 4 plates back on is a
pain.  There must be a better way!  Perhaps L shaped brackets??
RDH

On Mon, Aug 10, 2020 at 4:44 PM <public-list-request at lists.alberg30.org>
wrote:

> Send Public-List mailing list submissions to
>         public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
>         public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
>         public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
>    1. Companionway Hatch (Tom Dodds)
>    2. Re: Companionway Hatch (Jonathan Bresler)
>    3. Re: Companionway Hatch (Christian Douglas)
>    4. Re: Companionway Hatch (Winslow Ayer)
>    5. Re: Companionway Hatch (Tom Dodds)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 9 Aug 2020 19:39:47 -0400
> From: Tom Dodds <tomdodds at sympatico.ca>
> To: public-list at lists.alberg30.org
> Subject: [Public-List] Companionway Hatch
> Message-ID: <C6812C48-D333-4A9C-A827-0598DA351814 at sympatico.ca>
> Content-Type: text/plain; charset=utf-8
>
> My pre-liner boat?s sliding companionway hatch is in poor condition and
> requires significant repair or possibly replacement.
> Unfortunately, I cannot see how to remove it from the boat. What am I
> missing?
> Also, has anyone ever fashioned a fibreglass replacement?
>
> Tom Dodds
> StageOne
>
> Sent from my iPad
>
> ------------------------------
>
> Message: 2
> Date: Mon, 10 Aug 2020 08:37:14 -0400
> From: Jonathan Bresler <262alberg30 at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Cc: Tom Dodds <tomdodds at sympatico.ca>
> Subject: Re: [Public-List] Companionway Hatch
> Message-ID:
>         <CAHEe8TuDengjK=
> o0GfHQ1dWk1cfcwpoCJHw6T9AiN0+vPxMJFA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> You may be able to remove the hatch by pushing it fully to either starboard
> or port and
> getting the metal pieces below to clear the slides.
>
> The companionway hatch on #262 (pre-liner) is held in place by four pieces
> of metal
> screwed to the underside of the hatch near the forward and aft ends of the
> two sides
> of the hatch.  The pieces of metal are flush with the outside edges of the
> hatch and stick
> out towards the centerline of the boat.  The pieces are under the two
> slides (also metal)
> that are screwed to the cabin top and run fore and aft on either side of
> the companionway.
>
> Jonathan
>
> On Sun, Aug 9, 2020 at 7:39 PM Tom Dodds via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > My pre-liner boat?s sliding companionway hatch is in poor condition and
> > requires significant repair or possibly replacement.
> > Unfortunately, I cannot see how to remove it from the boat. What am I
> > missing?
> > Also, has anyone ever fashioned a fibreglass replacement?
> >
> > Tom Dodds
> > StageOne
> >
> > Sent from my iPad
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 10 Aug 2020 10:25:12 -0400
> From: Christian Douglas <a30kittiwake at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Companionway Hatch
> Message-ID:
>         <
> CAOONZk64YCuFyaFV_z5VErk1QW6a1+HyVzt1HvWYZ_43w7oAZg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Wow! Thanks, Jonathan. Guess I should?ve asked. I was planning on taking
> off the two vertical trim pieces to slide it out aft.
>
> Christian
> Kittiwake #76
>
> On Mon, Aug 10, 2020 at 09:55 Jonathan Bresler via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > You may be able to remove the hatch by pushing it fully to either
> starboard
> > or port and
> > getting the metal pieces below to clear the slides.
> >
> > The companionway hatch on #262 (pre-liner) is held in place by four
> pieces
> > of metal
> > screwed to the underside of the hatch near the forward and aft ends of
> the
> > two sides
> > of the hatch.  The pieces of metal are flush with the outside edges of
> the
> > hatch and stick
> > out towards the centerline of the boat.  The pieces are under the two
> > slides (also metal)
> > that are screwed to the cabin top and run fore and aft on either side of
> > the companionway.
> >
> > Jonathan
> >
> > On Sun, Aug 9, 2020 at 7:39 PM Tom Dodds via Public-List <
> > public-list at lists.alberg30.org> wrote:
> >
> > > My pre-liner boat?s sliding companionway hatch is in poor condition and
> > > requires significant repair or possibly replacement.
> > > Unfortunately, I cannot see how to remove it from the boat. What am I
> > > missing?
> > > Also, has anyone ever fashioned a fibreglass replacement?
> > >
> > > Tom Dodds
> > > StageOne
> > >
> > > Sent from my iPad
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> >
> >
> > --
> > Jonathan M Bresler
> > S/V Constance Alberg 30 #262
> > Annapolis/Eastport MD
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 10 Aug 2020 11:15:05 -0400
> From: Winslow Ayer <135sleddinghill at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Cc: Jonathan Bresler <262alberg30 at gmail.com>, Tom Dodds
>         <tomdodds at sympatico.ca>
> Subject: Re: [Public-List] Companionway Hatch
> Message-ID: <38345005-674C-4991-8C70-AB07103B02EF at gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> If you take off the 2 vertical pieces at the cockpit, the hatch should
> slide off.
>
> Winslow
>
> > On Aug 10, 2020, at 9:15 AM, Jonathan Bresler via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> > ?You may be able to remove the hatch by pushing it fully to either
> starboard
> > or port and
> > getting the metal pieces below to clear the slides.
> >
> > The companionway hatch on #262 (pre-liner) is held in place by four
> pieces
> > of metal
> > screwed to the underside of the hatch near the forward and aft ends of
> the
> > two sides
> > of the hatch.  The pieces of metal are flush with the outside edges of
> the
> > hatch and stick
> > out towards the centerline of the boat.  The pieces are under the two
> > slides (also metal)
> > that are screwed to the cabin top and run fore and aft on either side of
> > the companionway.
> >
> > Jonathan
> >
> >> On Sun, Aug 9, 2020 at 7:39 PM Tom Dodds via Public-List <
> >> public-list at lists.alberg30.org> wrote:
> >>
> >> My pre-liner boat?s sliding companionway hatch is in poor condition and
> >> requires significant repair or possibly replacement.
> >> Unfortunately, I cannot see how to remove it from the boat. What am I
> >> missing?
> >> Also, has anyone ever fashioned a fibreglass replacement?
> >>
> >> Tom Dodds
> >> StageOne
> >>
> >> Sent from my iPad
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>
> >
> >
> > --
> > Jonathan M Bresler
> > S/V Constance Alberg 30 #262
> > Annapolis/Eastport MD
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 10 Aug 2020 15:52:24 -0400
> From: Tom Dodds <tomdodds at sympatico.ca>
> To: Winslow Ayer <135sleddinghill at gmail.com>
> Cc: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>, Jonathan Bresler
>         <262alberg30 at gmail.com>
> Subject: Re: [Public-List] Companionway Hatch
> Message-ID: <C5C48436-9229-40C2-98A3-5E17A70ED63E at sympatico.ca>
> Content-Type: text/plain; charset=utf-8
>
> Winslow, that was the first thing I tried, it appears to be blocked from
> sliding off by the forward end of the hatch.
> I saw the four tabs that Jonathon mentions but they appear to be
> inaccessible. I will take a closer look, perhaps I can fit a small offset
> screwdriver in to remove them.
>
> Sent from my iPad
>
> > On Aug 10, 2020, at 11:15 AM, Winslow Ayer <135sleddinghill at gmail.com>
> wrote:
> >
> > ?If you take off the 2 vertical pieces at the cockpit, the hatch should
> slide off.
> >
> > Winslow
> >
> >> On Aug 10, 2020, at 9:15 AM, Jonathan Bresler via Public-List <
> public-list at lists.alberg30.org> wrote:
> >>
> >> ?You may be able to remove the hatch by pushing it fully to either
> starboard
> >> or port and
> >> getting the metal pieces below to clear the slides.
> >>
> >> The companionway hatch on #262 (pre-liner) is held in place by four
> pieces
> >> of metal
> >> screwed to the underside of the hatch near the forward and aft ends of
> the
> >> two sides
> >> of the hatch.  The pieces of metal are flush with the outside edges of
> the
> >> hatch and stick
> >> out towards the centerline of the boat.  The pieces are under the two
> >> slides (also metal)
> >> that are screwed to the cabin top and run fore and aft on either side of
> >> the companionway.
> >>
> >> Jonathan
> >>
> >>> On Sun, Aug 9, 2020 at 7:39 PM Tom Dodds via Public-List <
> >>> public-list at lists.alberg30.org> wrote:
> >>>
> >>> My pre-liner boat?s sliding companionway hatch is in poor condition and
> >>> requires significant repair or possibly replacement.
> >>> Unfortunately, I cannot see how to remove it from the boat. What am I
> >>> missing?
> >>> Also, has anyone ever fashioned a fibreglass replacement?
> >>>
> >>> Tom Dodds
> >>> StageOne
> >>>
> >>> Sent from my iPad
> >>> _______________________________________________
> >>> These businesses support your Association:
> >>> http://www.alberg30.org/store/A30supporters.html
> >>> Please support them.
> >>> _______________________________________________
> >>> Public-List mailing list
> >>> Public-List at lists.alberg30.org
> >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>>
> >>
> >>
> >> --
> >> Jonathan M Bresler
> >> S/V Constance Alberg 30 #262
> >> Annapolis/Eastport MD
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 4053, Issue 1
> ********************************************
>