[Public-List] Companionway Hatch

americo silva picomar1957 at gmail.com
Thu Aug 13 16:57:09 PDT 2020


try a hex bit and box wrench with a bit of masking tape to hold the bit in
place worked for me

On Thu, Aug 13, 2020 at 4:31 PM Tom Dodds via Public-List <
public-list at lists.alberg30.org> wrote:

> Following up on the companionway hatch removal, I was not able to remove
> the metal tabs, the screw driver bits were still to large to fit. I removed
> all but one of the screws holding the metal slides allowing it to rotate
> slightly. That allowed the hatch to lift away.
> Once I repair and finish the hatch, I will see if it is that easy to
> re-attach.
>
> Tom Dodds
> StageOne
>
> Sent from my iPad
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



More information about the Public-List mailing list