[Public-List] Companionway Hatch

americo silva picomar1957 at gmail.com
Sun Aug 16 04:12:02 PDT 2020


cut the bit

On Sat, Aug 15, 2020 at 2:20 PM Winslow Ayer via Public-List <
public-list at lists.alberg30.org> wrote:

> Fingers crossed! Hopefully it will just go back on. Good to know that it’s
> doable. I wonder how it was originally done?
>
> Winslow
>
> > On Aug 13, 2020, at 4:31 PM, Tom Dodds via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> > Following up on the companionway hatch removal, I was not able to
> remove the metal tabs, the screw driver bits were still to large to fit. I
> removed all but one of the screws holding the metal slides allowing it to
> rotate slightly. That allowed the hatch to lift away.
> > Once I repair and finish the hatch, I will see if it is that easy to
> re-attach.
> >
> > Tom Dodds
> > StageOne
> >
> > Sent from my iPad
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



More information about the Public-List mailing list