[Public-List] Electrical conduit

[Winslow Ayer]

You can also gently heat it with a heat gun and bend it to the curve you want. Then use standard couplings.

Winslow

> On Jul 5, 2020, at 8:04 AM, Michael Connolly via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Mike,
> CPVC will withstand more heat, but does not come in sweep elbows that I know of. Do you wish to pull wires through the conduit?, or just bundle the wires together? There is the spiral cable wrap you can use if you don't need it to be waterproof.
>> On 07/04/2020 12:33 PM Mike Nikolich via Public-List <public-list at lists.alberg30.org> wrote:
>> 
>> 
>> Any thoughts on what to use for conduit to route the cable bundle from the engine to the panel in the cockpit? Is PVC suitable?
>> 
>> Mike Nikolich
>> Skybird #550
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org