[Public-List] Main Haylard Sheave Bolt

Mike Lehman mlehman at gmail.com
Fri Mar 13 05:35:19 PDT 2020


Have you checked out

On Mon, Mar 9, 2020 at 2:02 PM Jonathan Bresler via Public-List <
public-list at lists.alberg30.org> wrote:

> Folks,
> Tried to pull the main halyard sheave bolt.  That bolt has been there since
> 1967, I'm guessing.  The bolt passes through a sleeve and the sleeve goes
> through the holes on either side of the mast.  The sheave appears to be
> Tufnol (brown color combination of resin impregnated cloth).  Guessing
> that is 1967 vintage as well.
> There are two plates, one on each side of the sheave, as well.
> The bolt and sleeve, they move together will not come out of the hole.  I
> can get it to move till the end of the bolt almost clears the plate on the
> side of the sheave, but not quite.  Have pulled, twisted, pushed (using a
> drift).  No luck.
> Any suggestions?  How have others managed the to get the bolt out.
> Jonathan
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

Mike Lehman

More information about the Public-List mailing list