[Public-List] Main Haylard Sheave Bolt

[George Dinwiddie]

OK, I've now combined all this information into 
http://alberg30.org/maintenance/SparsSailsRigging/MainSheave/

Please alert me to any typos you see.

  - George

On 3/13/20 1:17 PM, George Dinwiddie via Public-List wrote:
> For now, these pictures are posted in 
> http://alberg30.org/maintenance/disorganized/sheave/Tufnol/
> 
> I'll have to write up a more comprehensive page on mast sheaves that 
> includes the information from 
> http://alberg30.org/maintenance/disorganized/sheave/ and 
> http://alberg30.org/maintenance/SparsSailsRigging/MainSheave/ (unless 
> someone else wants to tackle this for me).
> 
>   - George
> 
> On 3/13/20 12:18 PM, Jonathan Bresler via Public-List wrote:
>> Here you go!
>> Six photos.
>> (yes i know the attachments will be stripped from the list
>> guess George will post a URL for us)
>>
>> On Fri, Mar 13, 2020 at 11:21 AM George Dinwiddie via Public-List <
>> public-list at lists.alberg30.org> wrote:
>>
>>> I really should organize the information on sheaves. Jonathan, could you
>>> take some photos of the Tufnol sheave that I can post? I only seem to
>>> have a photo of an aluminum sheave.
>>>
>>>    - George
>>>
>>> On 3/13/20 8:38 AM, Mike Lehman via Public-List wrote:
>>>> Jomathan
>>>>
>>>> This is even better
>>>>
>>> http://www.alberg30.org/maintenance/disorganized/sheave/replacement_design/ 
>>>
>>>>
>>>>
>>>> On Mon, Mar 9, 2020 at 2:02 PM Jonathan Bresler via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>>
>>>>> Folks,
>>>>>
>>>>> Tried to pull the main halyard sheave bolt.  That bolt has been there
>>> since
>>>>> 1967, I'm guessing.  The bolt passes through a sleeve and the sleeve
>>> goes
>>>>> through the holes on either side of the mast.  The sheave appears 
>>>>> to be
>>>>> Tufnol (brown color combination of resin impregnated cloth).  Guessing
>>>>> that is 1967 vintage as well.
>>>>> There are two plates, one on each side of the sheave, as well.
>>>>>
>>>>> The bolt and sleeve, they move together will not come out of the hole.
>>> I
>>>>> can get it to move till the end of the bolt almost clears the plate on
>>> the
>>>>> side of the sheave, but not quite.  Have pulled, twisted, pushed 
>>>>> (using
>>> a
>>>>> drift).  No luck.
>>>>>
>>>>> Any suggestions?  How have others managed the to get the bolt out.
>>>>>
>>>>> Jonathan
>>>>> -- 
>>>>> Jonathan M Bresler
>>>>> S/V Constance Alberg 30 #262
>>>>> Annapolis/Eastport MD
>>>>> _______________________________________________
>>>>> These businesses support your Association:
>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>> Please support them.
>>>>> _______________________________________________
>>>>> Public-List mailing list
>>>>> Public-List at lists.alberg30.org
>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>>
>>>>
>>>>
>>>
>>> -- 
>>>    
>>> ----------------------------------------------------------------------
>>>     When I remember bygone days                         George Dinwiddie
>>>     I think how evening follows morn;            gdinwiddie at alberg30.org
>>>     So many I loved were not yet dead,           http://www.Alberg30.org
>>>     So many I love were not yet born.                          also see:
>>>                  'The Middle' by Ogden Nash     http://idiacomputing.com
>>>    
>>> ----------------------------------------------------------------------
>>>
>>>
>>>
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>
>>
>>
> 

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------