[Public-List] Main Haylard Sheave Bolt

[Eric Ertley]

Ertleye at gmail.com

Sent from my iPhone

> On Mar 13, 2020, at 8:44 AM, Mike Lehman via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Jonathan,
> 
> Have you checked out
> http://www.alberg30.org/maintenance/SparsSailsRigging/MainSheave/
> 
>> On Mon, Mar 9, 2020 at 2:02 PM Jonathan Bresler via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>> Folks,
>> 
>> Tried to pull the main halyard sheave bolt.  That bolt has been there since
>> 1967, I'm guessing.  The bolt passes through a sleeve and the sleeve goes
>> through the holes on either side of the mast.  The sheave appears to be
>> Tufnol (brown color combination of resin impregnated cloth).  Guessing
>> that is 1967 vintage as well.
>> There are two plates, one on each side of the sheave, as well.
>> 
>> The bolt and sleeve, they move together will not come out of the hole.  I
>> can get it to move till the end of the bolt almost clears the plate on the
>> side of the sheave, but not quite.  Have pulled, twisted, pushed (using a
>> drift).  No luck.
>> 
>> Any suggestions?  How have others managed the to get the bolt out.
>> 
>> Jonathan
>> --
>> Jonathan M Bresler
>> S/V Constance Alberg 30 #262
>> Annapolis/Eastport MD
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
> 
> 
> -- 
> Mike Lehman
> ~~~_/)_/)~~_/)~~~
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org