[Public-List] Propeller Maintenance

Kris Coward kris at melon.org
Tue Nov 10 07:02:05 PST 2020


Candy Cane's prop shaft doesn't have enough room for an anode between
the prop and the cutless bearing, but I had no problems fitting a
teardrop-shaped anode on the end of the shaft.

-K

On Tue, Nov 10, 2020 at 09:52:05AM -0500, Gordon Laco via Public-List wrote:
> John, perhaps you can cut a shaft anode with a hacksaw and so make it fit between the prop and the cutless bearing?
> 
> The only negative aspect of a thin one is that you may have to replace it more often than a full round one on the shaft.
> 
> Gordon Laco
> 426 Surprise
> www.gordonlaco.com
> 
> 
> 
> 
> > On Nov 10, 2020, at 9:38 AM, Lou Griffith <lgriffith49 at gmail.com> wrote:
> > 
> > I agree with Gordon. We talked about this on SB, I was aghast that you had no cathodic protection. You said that there wasn’t room on the shaft. I said find it somewhere else
> > 
> > There is good prop paint out there but it is for marine growth not cathode use
> > 
> > Sent from my iPhone
> > 
> >> On Nov 10, 2020, at 9:10 AM, Gordon Laco <mainstay at csolve.net> wrote:
> >> 
> >> Hello John, 
> >> 
> >> No, paint will not stay on, and will not protect your propellor.  You need to affix a zinc anode to the shaft (or the rudder or deadwood as near to the prop as you can manage).  That is the only effective protection.
> >> 
> >> Any marine store will have a collection of zincs in tear drop or shaft mount configurations… They’re cheap and effective
> >> 
> >> Gordon Laco
> >> 426 Surprise
> >> www.gordonlaco.com <http://www.gordonlaco.com/>
> >> 
> >> 
> >> 
> >> 
> >>> On Nov 10, 2020, at 9:03 AM, John Irving via Public-List <public-list at lists.alberg30.org <mailto:public-list at lists.alberg30.org>> wrote:
> >>> 
> >>> I replaced my propeller about 5 years ago when my boat was in fresh water with a bronze one I got from Australia.  Last year I moved my A30 to the ocean.  It’s pitted as you can see from this picture.  Should I paint it with anti fouling paint?  Should I prime it first?
> >>> John Irving
> >>> Scotch Bonnet
> >>> 
> >>> _______________________________________________
> >>> These businesses support your Association:
> >>> http://www.alberg30.org/store/A30supporters.html <http://www.alberg30.org/store/A30supporters.html>
> >>> Please support them.
> >>> _______________________________________________
> >>> Public-List mailing list
> >>> Public-List at lists.alberg30.org
> >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3


More information about the Public-List mailing list