[Public-List] “Fridge” cover hardware suggestions

[Michael Connolly]

Doug,
As a suggestion, go to Rockler wood working supply and purchase the hardware for a drop down desk top. This will include two side telescoping supports ( which might be useful to hold the fridge in place whilst it is out and about), a piano hinge and a latch at the top.
> On 09/17/2020 11:52 AM Christian Douglas via Public-List <public-list at lists.alberg30.org> wrote:
> 
>  
> Kittiwake’s front loading ice box was removed at some point. Because of
> easy port side engine access, I didn’t wanna do a drop in box with cold
> plate. I went with an AC/DC cooler that slides out onto the port settee.
> However, I didn’t focus on the cover when I cut the opening.
> 
> Any suggestions of off the shelf hardware to secure the cover? Any hinge
> won’t work. I have thought of fabbing metal tabs for the four corners and
> using magnets.
> 
> Here are pics for reference.
> 
> https://imgur.com/gallery/x1XlNQw
> 
> 
> Christian
> Kittiwake #76
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org