[Public-List] “Fridge” cover hardware suggestions

George Dinwiddie gdinwiddie at alberg30.org
Thu Sep 17 14:11:13 PDT 2020

You could cut a piece of plywood that just fits the hole, put some 
blocks across the corners so it can't slip in, and hold it in place with 
some of these: https://amzn.to/2H2WS5A

  - George

On 9/17/20 11:52 AM, Christian Douglas via Public-List wrote:
> Kittiwake’s front loading ice box was removed at some point. Because of
> easy port side engine access, I didn’t wanna do a drop in box with cold
> plate. I went with an AC/DC cooler that slides out onto the port settee.
> However, I didn’t focus on the cover when I cut the opening.
> Any suggestions of off the shelf hardware to secure the cover? Any hinge
> won’t work. I have thought of fabbing metal tabs for the four corners and
> using magnets.
> Here are pics for reference.
> https://imgur.com/gallery/x1XlNQw
> Christian
> Kittiwake #760.org/listinfo.cgi/public-list-alberg30.org

   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com

More information about the Public-List mailing list