[Public-List] Twings and In-haulers

Gordon Laco mainstay at csolve.net
Fri Apr 23 06:04:22 PDT 2021


Thanks Michael, so says my wife too… and she gets to hear my stories over and over.  I have asked her a couple of times if the stories stay the same or if they evolve… she says ‘you are usually pretty good’.

Hmm.  I’ll have to make sure the stories don’t morph as time goes on.  

In one of Miles Smeaton’s books he’s talking about a visit he made on one of his voyages to the Azores.  He joined a flotilla of whaleboats on a hunt.  After a long chase the boats on the other side of the flotilla got a whale.  Smeaton wrote at the end of that segment ‘I only had a long distance view of the battle, but in future years I expect I’ll be in the boat at the centre of it’.

I try to guard against that sort of thing…

So my hopes of timely launch are double dashed this year… normally we’re in and sailing by now, but first the confusion at the marina then the renewed covid restrictions have clapped a stopper on things for a few weeks at least.  Oh well.  If the worst manifestation of the pandemic is sailing late again, well that’s nothing.

Gordon Laco
www.gordonlaco.com
426 Surprise 



> On Apr 23, 2021, at 8:54 AM, Michael Connolly <crufone at comcast.net> wrote:
> 
> Gord,
> I do believe that the GLAA and the CBAA would be greatly entertained and inspired by a compilation of all of your Misery Cruise recollections.  You have the gift of humourist story telling. All would benefit.  Surely there is enough for a small book.
> Michael
>> On 04/22/2021 12:48 PM Gordon Laco via Public-List <public-list at lists.alberg30.org> wrote:
>> 
>> 
>> Carrying terminology further…
>> 
>> If one is known to be a sailor, calling the mast the ’stick’ as it ‘I’m stepping my stick on Sunday’ or ’the Abbott 33 has a nice bendy stick’ is cool….   If you are not a sailor, then calling it a stick is just another symptom of lubber status.
>> 
>> If one is known as a sailor, the tiller is ’the stick’ but one never never calls it that unless it’s clear one is a sailor.
>> 
>> Around here we never said ‘Leeward’…. it had to be pronounced ‘Loo’rd’    
>> 
>> It is acceptable for one acknowledged sailor to compliment another’s new sails with ’nice rags’.   That’s an insult if the speaker is not of known status.
>> 
>> A sailor never says ‘prow’… hearing that one knows the speaker knows nothing so one can raise an eyebrow in significant distain.  However if the same part of a vessel is called ’the pointy end’, and the speaker is a sailor, well that’s cool.
>> 
>> When I was in training to be an officer in the RCN, we had a lecture on managing ship’s companies, or so the title of that day’s class went.  We were told…
>> 
>> - if Canadian seaman and American seamen are together, they may fight
>> - if Canadian seamen and Australian seamen are together, they’ll gang up on the Americans.
>> - If American sailors encounter British sailors they may fight
>> - if Canadian sailors come upon American sailors and British sailors already fighting, they might side with the Americans, unless the fight hasn’t started yet, in which case they will side with the British to fight the Americans.
>> 
>> This went on and on getting more and more complicated with more and more nationalities added.  I quickly realized we were being had… which was cool because it was the first glimmer of humour our instructors showed us in an otherwise intentionally stressful training experience.  I amused myself watching to see how long it took my fellow officer-trainees to lay their pens down and start grinning.  Quite a while, in a few cases...
>> 
>> 
>> Gordon Laco
>> 426 Surprise
>> 
>> 
>> 
>> 
>> 
>>> On Apr 22, 2021, at 12:23 PM, Greg Roberts via Public-List <public-list at lists.alberg30.org> wrote:
>>> 
>>> Ah, define one's terms first... Twings as defined in the articles I've
>>> been reading are attached low and primarily control the height of the
>>> clew.In-hauls are attached high and primarily control the horizontal
>>> position of the clew.A few articles have used the term barber hauler
>>> loosely to encompass both or when only one is used low and inboard of
>>> the rail.All of this is of course colored by regional use of terms.
>>> Part of exploring this is the concept of enabling technology. Machine
>>> vision is a good example. Industry was well aware of the value of
>>> having machines do high speed inspection long before it was practical.
>>> It became widely used once relatively cheap, high resolution cameras
>>> and processing hardware became available.Perhaps the newer rings and
>>> dyneema warrant a second look... Perhaps low friction rings and
>>> dyneema is an example of technology catching up, or not.
>>> Michael,I guess I would argue that adding a main traveler is a far
>>> more significant change to the original boat than adding twings etc...
>>> Mine, #43 like yours, didn't come with any of those and I certainly
>>> would not want to race without one. So, I have to ask with tongue
>>> firmly in cheek, should you have bought a different boat instead? :)
>>> As for slamming boats together: My non-skid pattern is shifted by
>>> several inches aft on port relative to starboard. The winches,
>>> stantion bases, etc were all installed relative to the pattern and as
>>> such are all shifted.
>>> Regards,
>>> Greg
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




More information about the Public-List mailing list