[Public-List] Rudder and cabin roof cross beam

[Andrew Johns]

Are you seeing the 7* under power?  Between a little slop in the tiller
head and fighting a little prop walk that wouldn’t be unheard of.



On Tue, Aug 3, 2021 at 12:39 PM Jonathan Bresler via Public-List <
public-list at lists.alberg30.org> wrote:

> Information on the mast beam repair is available at
> http://www.alberg30.org/maintenance/HullDeck/MastBeam/
>
> On Tue, Aug 3, 2021 at 10:43 AM Gordon Laco via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > Hello Gerry,
> >
> > Well the cure for the rudder is still the same… fill the holes in the
> > rudder head fitting with welding or brazing, then carefully redrill so
> you
> > end up with the correct orientation to have zero helm when the rudder is
> at
> > zero degrees.
> >
> > I’ll assume you do not have a warp in the rudder blade?  I think a twist
> > in the shaft is not possible, the blade would shear off or that bolt up
> top
> > would shear before the shaft twisted.
> >
> > With regard to the mast beam plates, I think there is quite specific
> > information on that on the Alberg 30 Association our American cousins
> keep
> > at http://alberg30.org <http://alberg30.org/>
> >
> > Cheers
> >
> >
> > Gordon Laco
> > 426 Surprise
> >
> >
> >
> >
> >
> > > On Aug 3, 2021, at 10:20 AM, Taft Gerry <gftaft at yahoo.ca> wrote:
> > >
> > > Thank you.  There is no keyway in this rudder head.  I have a hole
> > drilled right through the rudder shaft to align the rudder and to hold
> the
> > rudder head to the post.  Is this something a previous owner has done?
> > Perhaps they drilled it incorrectly? However thank you for your
> suggestion
> > of re-machining.
> > >
> > > Can you point me in the direction where I can find more information of
> > how the cross beam is easily fixed?
> > >
> > > On Tuesday, August 3, 2021, 07:05:18 a.m. PDT, Gordon Laco <
> > mainstay at csolve.net> wrote:
> > >
> > >
> > > Good morning,
> > >
> > > That’s an interesting list of issues…
> > >
> > > I appears  there is a problem with the new rudder head fitting.  There
> > will be a keyway slot machined in it… if you’ve got a seven degree offset
> > in your steering, that means you need to have the keyway filled and
> > remachined seven degrees in the appropriate direction.
> > >
> > > With regard to your beam issue… it’s one that all boats before hull
> > number 400 will need to have addressed at some time.   There is a
> > relatively easy fix which involves aluminium plates to bolster the beam.
> >  I reckon oak would work too, if one is committed to simple maintenance
> of
> > the wooden structure.
> > >
> > > Cheers -
> > >
> > > Gordon Laco
> > > Surprise 426
> > >
> > >
> > >
> > >
> > >
> > >> On Aug 3, 2021, at 10:01 AM, Taft Gerry via Public-List <
> > public-list at lists.alberg30.org <mailto:public-list at lists.alberg30.org>>
> > wrote:
> > >>
> > >> RudderOn the hard, the tiller, rudder and keel all appear to be in
> > alignment.  However once underway, in order to go straight, my tiller
> needs
> > to be offset by about 7 degrees to starboard.  The tiller head was
> > remanufactured last year, and this year I replaced the gudgeon, pintle
> and
> > rudder shoe. It has a thru-bolt to the rudder shaft and an alignment
> bolt -
> > no key way.
> > >> I am thinking my rudder stock is twisted however that does not explain
> > why everything appears to be in alignment until the boat is underway.
> > >> Cabin roof cross beamMy 1965 has a wood beam and it is deforming. I
> > have no interest in replacing the beam.
> > >> I am thinking about using a 4x4 and a bottle jack to support the beam
> > as required.
> > >>
> > >> Any comments or suggestions would be most appreciated
> > >> Gerry TaftKia Ora #103
> > >> _______________________________________________
> > >> These businesses support your Association:
> > >> http://www.alberg30.org/store/A30supporters.html <
> > http://www.alberg30.org/store/A30supporters.html>
> > >> Please support them.
> > >> _______________________________________________
> > >> Public-List mailing list
> > >> Public-List at lists.alberg30.org
> > >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>