[Public-List] Exhaust iron/steel sealant question.
WJ Carter
wjcarter51610 at gmail.com
Thu Dec 16 14:34:38 PST 2021
Hi J. As mentioned earlier it’s a high-temp/ gasket-maker/sealer. Permatex product I think. Used it a couple of times on two different engines, right at the manifold/block connection. Never failed. Worked great, would use it again. - bc
WJ Carter
> On Dec 16, 2021, at 4:23 PM, public-list-request at lists.alberg30.org wrote:
>
> Send Public-List mailing list submissions to
> public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
> public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
> public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
> 1. Re: [EXTERNAL] Public-List Digest, Vol 4261, Issue 1
> (Greenhouse, Matthew A. (GSFC-6650))
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 16 Dec 2021 21:12:16 +0000
> From: "Greenhouse, Matthew A. (GSFC-6650)" <matt.greenhouse at nasa.gov>
> To: "public-list at lists.alberg30.org" <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] [EXTERNAL] Public-List Digest, Vol 4261,
> Issue 1
> Message-ID:
> <BLAPR09MB7187686BE26C330A15EB40388A779 at BLAPR09MB7187.namprd09.prod.outlook.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Jonathan -- Teflon tape is fine for this and is available at any hardware store.
>
> Matt
>
> -----Original Message-----
> From: Public-List <public-list-bounces at lists.alberg30.org> On Behalf Of public-list-request at lists.alberg30.org
> Sent: Thursday, December 16, 2021 4:06 PM
> To: public-list at lists.alberg30.org
> Subject: [EXTERNAL] Public-List Digest, Vol 4261, Issue 1
>
> Send Public-List mailing list submissions to
> public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.alberg30.org%2Flistinfo.cgi%2Fpublic-list-alberg30.org&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=2a3hHTpgm%2FEKahzoXmkdzwtiIvP%2Fy5BwCy7upKguqBo%3D&reserved=0
> or, via email, send a message with subject or body 'help' to
> public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
> public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
> 1. Exhaust iron/steel pipe thread sealant (Jonathan Bresler)
> 2. Re: Exhaust iron/steel pipe thread sealant (George Dinwiddie)
> 3. Re: Exhaust iron/steel pipe thread sealant (Andrew Johns)
> 4. Re: Exhaust iron/steel pipe thread sealant
> (mike.nikolich550 at gmail.com)
> 5. Re: Exhaust iron/steel pipe thread sealant (Michael)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 15 Dec 2021 20:27:06 -0500
> From: Jonathan Bresler <262alberg30 at gmail.com>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: [Public-List] Exhaust iron/steel pipe thread sealant
> Message-ID:
> <CAHEe8Tvhsh0Jy7ivGNQC=g0u5gxH78qgk3VUiN_7Ywn_nG+ZFQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Dear Albergers,
>
> One of the projects this winter is replacing the stuffing in the stuffing box. To improve access to the stuffing box, I removed the waterlift muffler, a Vetus item, located below the cockpit sole above the stuffing box. In doing so, the heavy duty exhaust hose did not come off the iron/steel threaded pipe segment but rather the pipe unscrewed from the rest of the exhaust.
>
> Found that the connection was sealed with a red, rubbery material. Don't
> believe that I've ever seen such before. A photo of the material is at
> https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F14F3F-42SbZWMayvyOYYkEgyuMRi2QX-o%2Fview%3Fusp%3Dsharing&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hJC48pNU6oac5%2B8VHXdZNajNVJU4z5Nldd6mOQwh4tY%3D&reserved=0
>
> Does anyone know what the material is? What should I use to seal the threaded pipe fitting during reassembly?
>
> Thank you,
> Jonathan
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 15 Dec 2021 19:34:52 -0600
> From: George Dinwiddie <gdinwiddie at alberg30.org>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Exhaust iron/steel pipe thread sealant
> Message-ID: <650D51BF-5692-4034-8362-C9D9B381FC75 at alberg30.org>
> Content-Type: text/plain; charset=utf-8
>
> Jonathan
>
> It?s probably some sort of pipe dope. I use RectorSeal which was recommended by a well-respected mechanic on rec.boats years ago. Look for it in the plumbing department of your hardware store.
>
> George
>
>
>> On Dec 15, 2021, at 19:27, Jonathan Bresler via Public-List <public-list at lists.alberg30.org> wrote:
>>
>> Dear Albergers,
>>
>> One of the projects this winter is replacing the stuffing in the stuffing
>> box. To improve access to the stuffing box, I removed the waterlift
>> muffler, a Vetus item, located below the cockpit sole above the stuffing
>> box. In doing so, the heavy duty exhaust hose did not come off the
>> iron/steel threaded pipe segment but rather the pipe unscrewed from the
>> rest of the exhaust.
>>
>> Found that the connection was sealed with a red, rubbery material. Don't
>> believe that I've ever seen such before. A photo of the material is at
>> https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F14F3F-42SbZWMayvyOYYkEgyuMRi2QX-o%2Fview%3Fusp%3Dsharing&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hJC48pNU6oac5%2B8VHXdZNajNVJU4z5Nldd6mOQwh4tY%3D&reserved=0
>>
>> Does anyone know what the material is? What should I use to seal the
>> threaded pipe fitting during reassembly?
>>
>> Thank you,
>> Jonathan
>> --
>> Jonathan M Bresler
>> S/V Constance Alberg 30 #262
>> Annapolis/Eastport
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 15 Dec 2021 21:52:14 -0500
> From: Andrew Johns <johnsab9 at gmail.com>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Exhaust iron/steel pipe thread sealant
> Message-ID:
> <CAM5xwU5r25WyPQwrW35grEU98z9knrRFs-s6XT+SFEQnVibpUg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Looks like high temp silicone RTV. I have used that and a high temp
> thread sealant without issues.
>
>> On Wed, Dec 15, 2021 at 8:35 PM George Dinwiddie via Public-List <
>> public-list at lists.alberg30.org> wrote:
>>
>> Jonathan
>>
>> It?s probably some sort of pipe dope. I use RectorSeal which was
>> recommended by a well-respected mechanic on rec.boats years ago. Look for
>> it in the plumbing department of your hardware store.
>>
>> George
>>
>>
>>> On Dec 15, 2021, at 19:27, Jonathan Bresler via Public-List <
>> public-list at lists.alberg30.org> wrote:
>>>
>>> Dear Albergers,
>>>
>>> One of the projects this winter is replacing the stuffing in the stuffing
>>> box. To improve access to the stuffing box, I removed the waterlift
>>> muffler, a Vetus item, located below the cockpit sole above the stuffing
>>> box. In doing so, the heavy duty exhaust hose did not come off the
>>> iron/steel threaded pipe segment but rather the pipe unscrewed from the
>>> rest of the exhaust.
>>>
>>> Found that the connection was sealed with a red, rubbery material. Don't
>>> believe that I've ever seen such before. A photo of the material is at
>>>
>> https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F14F3F-42SbZWMayvyOYYkEgyuMRi2QX-o%2Fview%3Fusp%3Dsharing&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hJC48pNU6oac5%2B8VHXdZNajNVJU4z5Nldd6mOQwh4tY%3D&reserved=0
>>>
>>> Does anyone know what the material is? What should I use to seal the
>>> threaded pipe fitting during reassembly?
>>>
>>> Thank you,
>>> Jonathan
>>> --
>>> Jonathan M Bresler
>>> S/V Constance Alberg 30 #262
>>> Annapolis/Eastport
>> _______________________________________________
>> These businesses support your Association:
>> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.alberg30.org%2Fstore%2FA30supporters.html&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=tPwIJho5Xf4YzstC6vRgIkbYPrbCRhjdXpqLUTf7oKE%3D&reserved=0
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.alberg30.org%2Flistinfo.cgi%2Fpublic-list-alberg30.org&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=2a3hHTpgm%2FEKahzoXmkdzwtiIvP%2Fy5BwCy7upKguqBo%3D&reserved=0
>>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 15 Dec 2021 23:56:54 -0500
> From: mike.nikolich550 at gmail.com
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Exhaust iron/steel pipe thread sealant
> Message-ID: <509B1F7C-56BD-45A6-BB93-8206C06FF5DD at gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> Jonathan,
>
> I have Bostic Never-Seez anti-seize/sealant that I used when I had to replace the iron pipe pieces going from my exhaust manifold to the standpipe muffler. You?re welcome to borrow it.
>
> Mike
> Skybird #550
>
> On Dec 15, 2021, at 8:27 PM, Jonathan Bresler via Public-List <public-list at lists.alberg30.org> wrote:
>
> ?Dear Albergers,
>
> One of the projects this winter is replacing the stuffing in the stuffing
> box. To improve access to the stuffing box, I removed the waterlift
> muffler, a Vetus item, located below the cockpit sole above the stuffing
> box. In doing so, the heavy duty exhaust hose did not come off the
> iron/steel threaded pipe segment but rather the pipe unscrewed from the
> rest of the exhaust.
>
> Found that the connection was sealed with a red, rubbery material. Don't
> believe that I've ever seen such before. A photo of the material is at
> https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F14F3F-42SbZWMayvyOYYkEgyuMRi2QX-o%2Fview%3Fusp%3Dsharing&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hJC48pNU6oac5%2B8VHXdZNajNVJU4z5Nldd6mOQwh4tY%3D&reserved=0
>
> Does anyone know what the material is? What should I use to seal the
> threaded pipe fitting during reassembly?
>
> Thank you,
> Jonathan
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.alberg30.org%2Fstore%2FA30supporters.html&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=tPwIJho5Xf4YzstC6vRgIkbYPrbCRhjdXpqLUTf7oKE%3D&reserved=0
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.alberg30.org%2Flistinfo.cgi%2Fpublic-list-alberg30.org&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=2a3hHTpgm%2FEKahzoXmkdzwtiIvP%2Fy5BwCy7upKguqBo%3D&reserved=0
>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 16 Dec 2021 11:39:05 +0000
> From: Michael <dickdurk at gmail.com>
> To: "Alberg 30 Public List -- open to all"
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Exhaust iron/steel pipe thread sealant
> Message-ID: <emec871d4c-ca71-4984-b202-1affb2097705 at windows-4mp6ooi>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Lately I have been binge watching Road Kill Garage and was pleased to
> hear one of the gearheads on the show does what I do- don't seal things
> up, make it so they come apart,in the future. I never seize everything,
> including hoses. Dulchich (the gear head), uses grease, but same thing.
> Mike L's suggestion is a good one.
>
> Michael Grosh
> #220
>
>
> ------ Original Message ------
> From: "Mike Nikolich via Public-List" <public-list at lists.alberg30.org>
> To: "Alberg 30 Public List -- open to all"
> <public-list at lists.alberg30.org>
> Cc: mike.nikolich550 at gmail.com
> Sent: 12/15/2021 11:56:54 PM
> Subject: Re: [Public-List] Exhaust iron/steel pipe thread sealant
>
>> Jonathan,
>>
>> I have Bostic Never-Seez anti-seize/sealant that I used when I had to replace the iron pipe pieces going from my exhaust manifold to the standpipe muffler. You?re welcome to borrow it.
>>
>> Mike
>> Skybird #550
>>
>> On Dec 15, 2021, at 8:27 PM, Jonathan Bresler via Public-List <public-list at lists.alberg30.org> wrote:
>>
>> ?Dear Albergers,
>>
>> One of the projects this winter is replacing the stuffing in the stuffing
>> box. To improve access to the stuffing box, I removed the waterlift
>> muffler, a Vetus item, located below the cockpit sole above the stuffing
>> box. In doing so, the heavy duty exhaust hose did not come off the
>> iron/steel threaded pipe segment but rather the pipe unscrewed from the
>> rest of the exhaust.
>>
>> Found that the connection was sealed with a red, rubbery material. Don't
>> believe that I've ever seen such before. A photo of the material is at
>> https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F14F3F-42SbZWMayvyOYYkEgyuMRi2QX-o%2Fview%3Fusp%3Dsharing&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=hJC48pNU6oac5%2B8VHXdZNajNVJU4z5Nldd6mOQwh4tY%3D&reserved=0
>>
>> Does anyone know what the material is? What should I use to seal the
>> threaded pipe fitting during reassembly?
>>
>> Thank you,
>> Jonathan
>> --
>> Jonathan M Bresler
>> S/V Constance Alberg 30 #262
>> Annapolis/Eastport MD
>> _______________________________________________
>> These businesses support your Association:
>> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.alberg30.org%2Fstore%2FA30supporters.html&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=tPwIJho5Xf4YzstC6vRgIkbYPrbCRhjdXpqLUTf7oKE%3D&reserved=0
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.alberg30.org%2Flistinfo.cgi%2Fpublic-list-alberg30.org&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=2a3hHTpgm%2FEKahzoXmkdzwtiIvP%2Fy5BwCy7upKguqBo%3D&reserved=0
>> _______________________________________________
>> These businesses support your Association:
>> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.alberg30.org%2Fstore%2FA30supporters.html&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127297176%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=tPwIJho5Xf4YzstC6vRgIkbYPrbCRhjdXpqLUTf7oKE%3D&reserved=0
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.alberg30.org%2Flistinfo.cgi%2Fpublic-list-alberg30.org&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127307135%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=YRLz7Dc7sHhAquM8%2BiY4DDMuune8BXaxRMT%2Bpf3fU%2Bo%3D&reserved=0
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.alberg30.org%2Fstore%2FA30supporters.html&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127307135%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=7iutmqIw%2Blykc9jpWMyPo7DDFmqSCwlA1Fvw8sfWuvs%3D&reserved=0
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.alberg30.org%2Flistinfo.cgi%2Fpublic-list-alberg30.org&data=04%7C01%7Cmatt.greenhouse%40nasa.gov%7C298680284cd245fc35e808d9c0d83642%7C7005d45845be48ae8140d43da96dd17b%7C0%7C0%7C637752857127307135%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=YRLz7Dc7sHhAquM8%2BiY4DDMuune8BXaxRMT%2Bpf3fU%2Bo%3D&reserved=0
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 4261, Issue 1
> ********************************************
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 4261, Issue 2
> ********************************************
More information about the Public-List
mailing list