[Public-List] Public-List Digest, Vol 4114, Issue 3

Winslow Ayer 135sleddinghill at gmail.com
Thu Feb 4 09:17:44 PST 2021


I don’t do any social media but I am interested in a couple of the production plates.

Winslow

> On Feb 4, 2021, at 12:01 PM, charles pleisse via Public-List <public-list at lists.alberg30.org> wrote:
> 
> I've initialized a survey of interested parties on FB.
> 
> Charles Pleisse
> College Park Bicycles
> ( <http://www.bike123.com>301)864-2211
> 
> 
>> On Thu, Feb 4, 2021 at 11:40 AM charles pleisse <velocharles1 at gmail.com>
>> wrote:
>> 
>> For the sake of anybody who may be interested, could someone with a clear
>> example of one of these post an image.
>> 
>> 
>> Charles Pleisse
>> College Park Bicycles
>> ( <http://www.bike123.com>301)864-2211
>> 
>> 
>> On Wed, Feb 3, 2021 at 11:06 PM <public-list-request at lists.alberg30.org>
>> wrote:
>> 
>>> Send Public-List mailing list submissions to
>>>        public-list at lists.alberg30.org
>>> 
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>        http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> or, via email, send a message with subject or body 'help' to
>>>        public-list-request at lists.alberg30.org
>>> 
>>> You can reach the person managing the list at
>>>        public-list-owner at lists.alberg30.org
>>> 
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of Public-List digest..."
>>> 
>>> 
>>> Please do NOT include the entire digest in your reply!
>>> ======================================================
>>> 
>>> 
>>> 
>>> Today's Topics:
>>> 
>>>   1. Re: Liability Insurance (Jay Davenport)
>>>   2. Re: Reproduction Builder's plates (Kris Coward)
>>>   3. Re: Reproduction Builder's plates (Roy Jarnagin)
>>>   4. Re: Reproduction Builder's plates (John Irving)
>>> 
>>> 
>>> ----------------------------------------------------------------------
>>> 
>>> Message: 1
>>> Date: Wed, 3 Feb 2021 21:22:15 +0000 (UTC)
>>> From: Jay Davenport <jay at saildriver.com>
>>> To: "public-list at lists.alberg30.org" <public-list at lists.alberg30.org>
>>> Cc: George Dinwiddie <gdinwiddie at alberg30.org>
>>> Subject: Re: [Public-List] Liability Insurance
>>> Message-ID: <1803125155.1533104.1612387335272 at mail.yahoo.com>
>>> Content-Type: text/plain; charset=UTF-8
>>> 
>>> Allstate has been insuring my 1973 boat for the last 28 years, but I may
>>> be grandfathered. I don't know if they are currently taking on older boats.
>>> In any case, their premiums and service on claims have been good, and they
>>> include $500. in towing insurance.
>>> Jay?
>>> 
>>> 
>>> 
>>>    On Wednesday, February 3, 2021, 03:50:49 PM EST, George Dinwiddie via
>>> Public-List <public-list at lists.alberg30.org> wrote:
>>> 
>>> Another company, which I've not seen mentioned here, is Gowrie Group.
>>> They acquired IMIS which was an independent marine insurance broker
>>> started by Al Golden, whom I met through the CompuServe sailing forum.
>>> 
>>> It's hard to say how good they are, since I've never made a claim. You
>>> can find them at https://www.gowrie.com/Marine-Insurance/IMIS.aspx
>>> 
>>> ? - George
>>> 
>>> On 2/3/21 8:38 AM, P Seidel via Public-List wrote:
>>>> ? As a data point, USAA/Progressive and BoatUS/Geico will not insure a
>>> boat built before 1965.? Erie and State Farm will.? I just ran into this
>>> with trying to insure the #8 boat.
>>>> ? ? ? On Wednesday, February 3, 2021, 08:28:55 AM EST, Mike Lehman via
>>> Public-List <public-list at lists.alberg30.org> wrote:
>>>> ?
>>>> ? We are very pleased with Erie
>>>> 
>>>> On Tue, Feb 2, 2021 at 10:16 PM Jonathan Bresler via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>>> Al,
>>>>> 
>>>>> Congratulations on finding an Alberg 30!
>>>>> You may wish to check with Progressive or
>>>>> USAA.
>>>>> 
>>>>> Which Alberg 30 you are considering?
>>>>> 
>>>>> Jonathan
>>>>> 
>>>>> On Tue, Feb 2, 2021 at 6:56 PM Alexander Mitchell via Public-List <
>>>>> public-list at lists.alberg30.org> wrote:
>>>>> 
>>>>>> Hey all,
>>>>>> 
>>>>>> I am looking at purchasing an A30 here in the midwest, and am 98% of
>>> the
>>>>>> way ready to say yes, pending a few last things.? The marina says I
>>> need
>>>>>> liability insurance, but Geico/ Boat US won't insure anything that old
>>>>>> (1965).
>>>>>> 
>>>>>> Any recommendations?
>>>>>> 
>>>>>> Thanks in advance,
>>>>>> Al
>>>>>> 
>>>>>> --
>>>>>> Al Mitchell
>>>>>> 815-579-4968
>>>>>> _______________________________________________
>>>>>> These businesses support your Association:
>>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>>> Please support them.
>>>>>> _______________________________________________
>>>>>> Public-List mailing list
>>>>>> Public-List at lists.alberg30.org
>>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>>> 
>>>>> 
>>>>> 
>>>>> --
>>>>> Jonathan M Bresler
>>>>> S/V Constance Alberg 30 #262
>>>>> Annapolis/Eastport MD
>>>>> _______________________________________________
>>>>> These businesses support your Association:
>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>> Please support them.
>>>>> _______________________________________________
>>>>> Public-List mailing list
>>>>> Public-List at lists.alberg30.org
>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>> 
>>>> 
>>>> 
>>> 
>>> --
>>> ? ----------------------------------------------------------------------
>>> ? When I remember bygone days? ? ? ? ? ? ? ? ? ? ? ? George Dinwiddie
>>> ? I think how evening follows morn;? ? ? ? ? ? gdinwiddie at alberg30.org
>>> ? So many I loved were not yet dead,? ? ? ? ? http://www.Alberg30.org
>>> ? So many I love were not yet born.? ? ? ? ? ? ? ? ? ? ? ? ? also see:
>>> ? ? ? ? ? ? ? ? 'The Middle' by Ogden Nash? ? http://idiacomputing.com
>>> ? ----------------------------------------------------------------------
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> 
>>> ------------------------------
>>> 
>>> Message: 2
>>> Date: Wed, 3 Feb 2021 19:25:09 -0500
>>> From: Kris Coward <kris at melon.org>
>>> To: Mike Lehman via Public-List <public-list at lists.alberg30.org>
>>> Subject: Re: [Public-List] Reproduction Builder's plates
>>> Message-ID: <20210204002508.urbuqi6tajdo3j7m at melon.org>
>>> Content-Type: text/plain; charset=utf-8
>>> 
>>> 
>>> Do you still have the image of the plate that was sent for the previous
>>> run of them? Possibly also dimensions?
>>> 
>>> In a conversation off-list with a few people who'd expressed interest, I
>>> brought up having found some good indications that hitting anodized
>>> aluminum with a CO2 laser (of the sort you can find at most
>>> hackerspaces/makerspaces, and that a decent assortment of hobbyists also
>>> have at home) burns off the dye in the anodization, leaving bright (but
>>> I imagine still anodized) metal.
>>> 
>>> Basically this means that if you've got a suitably sized and coloured
>>> piece of anodized sheet/plate, and an image file, there's a decent
>>> change that you can find a hackerspace, makerspace, or hobbyist with a
>>> laser and a willingness to help you out to make your own plate with no
>>> minimum order size.
>>> 
>>> I don't know where to find such a laser around the Chesapeake, but for
>>> Albergers close to Toronto, I know that Hacklab and Site 3 each have
>>> such a laser, can't quite remember if the Toronto Public Library has one
>>> (or if they've just got 3d printers), strongly suspect that the Toronto
>>> Tool Library has one, and I've got some friends around High Park who
>>> have one at home (and know of 2 more home lasers belonging to friends
>>> who live up in Deep River). I imagine that they're not that much scarcer
>>> around Maryland.
>>> 
>>> Cheers,
>>> Kris
>>> 
>>> On Mon, Feb 01, 2021 at 03:18:50PM -0500, Mike Lehman via Public-List
>>> wrote:
>>>> Jim and I did this project as a team, I'll check the inventory but I am
>>>> pretty sure it is depleted. I remember ordering them and may have a
>>> record
>>>> from where in Baltimore. What I distinctly remember was the minimum
>>> order
>>>> was 1,000 plates.
>>>> 
>>>> Mike Lehman
>>>> ~~~_/)_/)~~_/)~~~
>>>> 
>>>> 
>>>> 
>>>> 
>>>> On Mon, Feb 1, 2021, 3:13 PM Michael via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>>> Jim Menucci was the ramrod for that offering; he is gone now. I don't
>>>>> know where his source was.
>>>>> 
>>>>> Michael Grosh
>>>>> #220
>>>>> 
>>>>> ------ Original Message ------
>>>>> From: "Gordon Laco via Public-List" <public-list at lists.alberg30.org>
>>>>> To: "Alberg 30 Public List -- open to all"
>>>>> <public-list at lists.alberg30.org>
>>>>> Cc: "Gordon Laco" <mainstay at csolve.net>
>>>>> Sent: 2/1/2021 2:44:22 PM
>>>>> Subject: [Public-List] Reproduction Builder's plates
>>>>> 
>>>>>> Hello friends,
>>>>>> 
>>>>>> Forgive me if this has been covered already? but are there still
>>>>> reproduction builder?s plates for our boats available from the
>>> Association?
>>>>>> 
>>>>>> I?d be interested in one myself? ours has long since had the blue
>>>>> printing worn off?
>>>>>> 
>>>>>> 
>>>>>> Gordon Laco
>>>>>> 426 Surprise
>>>>>> www.gordonlaco.com
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> These businesses support your Association:
>>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>>> Please support them.
>>>>>> _______________________________________________
>>>>>> Public-List mailing list
>>>>>> Public-List at lists.alberg30.org
>>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>> 
>>>>> _______________________________________________
>>>>> These businesses support your Association:
>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>> Please support them.
>>>>> _______________________________________________
>>>>> Public-List mailing list
>>>>> Public-List at lists.alberg30.org
>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> --
>>> Kris Coward                                     http://unripe.melon.org/
>>> GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
>>> 
>>> 
>>> ------------------------------
>>> 
>>> Message: 3
>>> Date: Wed, 3 Feb 2021 20:06:19 -0600
>>> From: "Roy Jarnagin" <roy.jarnagin at gmail.com>
>>> To: "'Alberg 30 Public List -- open to all'"
>>>        <public-list at lists.alberg30.org>
>>> Subject: Re: [Public-List] Reproduction Builder's plates
>>> Message-ID: <000e01d6fa9a$5495f670$fdc1e350$@gmail.com>
>>> Content-Type: text/plain;       charset="utf-8"
>>> 
>>> You might check out the site frontpanelexpress.com. I have used them to
>>> make panels for electronic equipment and have been pleased with the results.
>>> 
>>> Roy Jarnagin
>>> 
>>> Southern Serenity #72
>>> 
>>> 
>>> -----Original Message-----
>>> From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
>>> Behalf Of Kris Coward via Public-List
>>> Sent: Wednesday, February 03, 2021 6:25 PM
>>> To: Mike Lehman via Public-List <public-list at lists.alberg30.org>
>>> Cc: Kris Coward <kris at melon.org>
>>> Subject: Re: [Public-List] Reproduction Builder's plates
>>> 
>>> 
>>> Do you still have the image of the plate that was sent for the previous
>>> run of them? Possibly also dimensions?
>>> 
>>> In a conversation off-list with a few people who'd expressed interest, I
>>> brought up having found some good indications that hitting anodized
>>> aluminum with a CO2 laser (of the sort you can find at most
>>> hackerspaces/makerspaces, and that a decent assortment of hobbyists also
>>> have at home) burns off the dye in the anodization, leaving bright (but I
>>> imagine still anodized) metal.
>>> 
>>> Basically this means that if you've got a suitably sized and coloured
>>> piece of anodized sheet/plate, and an image file, there's a decent change
>>> that you can find a hackerspace, makerspace, or hobbyist with a laser and a
>>> willingness to help you out to make your own plate with no minimum order
>>> size.
>>> 
>>> I don't know where to find such a laser around the Chesapeake, but for
>>> Albergers close to Toronto, I know that Hacklab and Site 3 each have such a
>>> laser, can't quite remember if the Toronto Public Library has one (or if
>>> they've just got 3d printers), strongly suspect that the Toronto Tool
>>> Library has one, and I've got some friends around High Park who have one at
>>> home (and know of 2 more home lasers belonging to friends who live up in
>>> Deep River). I imagine that they're not that much scarcer around Maryland.
>>> 
>>> Cheers,
>>> Kris
>>> 
>>> On Mon, Feb 01, 2021 at 03:18:50PM -0500, Mike Lehman via Public-List
>>> wrote:
>>>> Jim and I did this project as a team, I'll check the inventory but I
>>>> am pretty sure it is depleted. I remember ordering them and may have a
>>>> record from where in Baltimore. What I distinctly remember was the
>>>> minimum order was 1,000 plates.
>>>> 
>>>> Mike Lehman
>>>> ~~~_/)_/)~~_/)~~~
>>>> 
>>>> 
>>>> 
>>>> 
>>>> On Mon, Feb 1, 2021, 3:13 PM Michael via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>>> Jim Menucci was the ramrod for that offering; he is gone now. I
>>>>> don't know where his source was.
>>>>> 
>>>>> Michael Grosh
>>>>> #220
>>>>> 
>>>>> ------ Original Message ------
>>>>> From: "Gordon Laco via Public-List" <public-list at lists.alberg30.org>
>>>>> To: "Alberg 30 Public List -- open to all"
>>>>> <public-list at lists.alberg30.org>
>>>>> Cc: "Gordon Laco" <mainstay at csolve.net>
>>>>> Sent: 2/1/2021 2:44:22 PM
>>>>> Subject: [Public-List] Reproduction Builder's plates
>>>>> 
>>>>>> Hello friends,
>>>>>> 
>>>>>> Forgive me if this has been covered already? but are there still
>>>>> reproduction builder?s plates for our boats available from the
>>> Association?
>>>>>> 
>>>>>> I?d be interested in one myself? ours has long since had the blue
>>>>> printing worn off?
>>>>>> 
>>>>>> 
>>>>>> Gordon Laco
>>>>>> 426 Surprise
>>>>>> www.gordonlaco.com
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> These businesses support your Association:
>>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>>> Please support them.
>>>>>> _______________________________________________
>>>>>> Public-List mailing list
>>>>>> Public-List at lists.alberg30.org
>>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>> 
>>>>> _______________________________________________
>>>>> These businesses support your Association:
>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>> Please support them.
>>>>> _______________________________________________
>>>>> Public-List mailing list
>>>>> Public-List at lists.alberg30.org
>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> --
>>> Kris Coward                                     http://unripe.melon.org/
>>> GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> 
>>> 
>>> ------------------------------
>>> 
>>> Message: 4
>>> Date: Wed, 3 Feb 2021 21:49:59 -0500
>>> From: John Irving <jirvingvt at gmail.com>
>>> To: Alberg 30 Public List -- open to all
>>>        <public-list at lists.alberg30.org>
>>> Subject: Re: [Public-List] Reproduction Builder's plates
>>> Message-ID: <6A607ACE-D4A6-448A-976B-9565D32D6DDC at gmail.com>
>>> Content-Type: text/plain; charset=utf-8
>>> 
>>> I?d be interested in a builder?s plate for Scotch Bonnet.  How much are
>>> they?
>>> 
>>>> On Feb 3, 2021, at 9:11 PM, Roy Jarnagin via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> ?You might check out the site frontpanelexpress.com. I have used them
>>> to make panels for electronic equipment and have been pleased with the
>>> results.
>>>> 
>>>> Roy Jarnagin
>>>> 
>>>> Southern Serenity #72
>>>> 
>>>> 
>>>> -----Original Message-----
>>>> From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
>>> Behalf Of Kris Coward via Public-List
>>>> Sent: Wednesday, February 03, 2021 6:25 PM
>>>> To: Mike Lehman via Public-List <public-list at lists.alberg30.org>
>>>> Cc: Kris Coward <kris at melon.org>
>>>> Subject: Re: [Public-List] Reproduction Builder's plates
>>>> 
>>>> 
>>>> Do you still have the image of the plate that was sent for the previous
>>> run of them? Possibly also dimensions?
>>>> 
>>>> In a conversation off-list with a few people who'd expressed interest,
>>> I brought up having found some good indications that hitting anodized
>>> aluminum with a CO2 laser (of the sort you can find at most
>>> hackerspaces/makerspaces, and that a decent assortment of hobbyists also
>>> have at home) burns off the dye in the anodization, leaving bright (but I
>>> imagine still anodized) metal.
>>>> 
>>>> Basically this means that if you've got a suitably sized and coloured
>>> piece of anodized sheet/plate, and an image file, there's a decent change
>>> that you can find a hackerspace, makerspace, or hobbyist with a laser and a
>>> willingness to help you out to make your own plate with no minimum order
>>> size.
>>>> 
>>>> I don't know where to find such a laser around the Chesapeake, but for
>>> Albergers close to Toronto, I know that Hacklab and Site 3 each have such a
>>> laser, can't quite remember if the Toronto Public Library has one (or if
>>> they've just got 3d printers), strongly suspect that the Toronto Tool
>>> Library has one, and I've got some friends around High Park who have one at
>>> home (and know of 2 more home lasers belonging to friends who live up in
>>> Deep River). I imagine that they're not that much scarcer around Maryland.
>>>> 
>>>> Cheers,
>>>> Kris
>>>> 
>>>>> On Mon, Feb 01, 2021 at 03:18:50PM -0500, Mike Lehman via Public-List
>>> wrote:
>>>>> Jim and I did this project as a team, I'll check the inventory but I
>>>>> am pretty sure it is depleted. I remember ordering them and may have a
>>>>> record from where in Baltimore. What I distinctly remember was the
>>>>> minimum order was 1,000 plates.
>>>>> 
>>>>> Mike Lehman
>>>>> ~~~_/)_/)~~_/)~~~
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> On Mon, Feb 1, 2021, 3:13 PM Michael via Public-List <
>>>>> public-list at lists.alberg30.org> wrote:
>>>>> 
>>>>>> Jim Menucci was the ramrod for that offering; he is gone now. I
>>>>>> don't know where his source was.
>>>>>> 
>>>>>> Michael Grosh
>>>>>> #220
>>>>>> 
>>>>>> ------ Original Message ------
>>>>>> From: "Gordon Laco via Public-List" <public-list at lists.alberg30.org>
>>>>>> To: "Alberg 30 Public List -- open to all"
>>>>>> <public-list at lists.alberg30.org>
>>>>>> Cc: "Gordon Laco" <mainstay at csolve.net>
>>>>>> Sent: 2/1/2021 2:44:22 PM
>>>>>> Subject: [Public-List] Reproduction Builder's plates
>>>>>> 
>>>>>>> Hello friends,
>>>>>>> 
>>>>>>> Forgive me if this has been covered already? but are there still
>>>>>> reproduction builder?s plates for our boats available from the
>>> Association?
>>>>>>> 
>>>>>>> I?d be interested in one myself? ours has long since had the blue
>>>>>> printing worn off?
>>>>>>> 
>>>>>>> 
>>>>>>> Gordon Laco
>>>>>>> 426 Surprise
>>>>>>> www.gordonlaco.com
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> These businesses support your Association:
>>>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>>>> Please support them.
>>>>>>> _______________________________________________
>>>>>>> Public-List mailing list
>>>>>>> Public-List at lists.alberg30.org
>>>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>>> 
>>>>>> _______________________________________________
>>>>>> These businesses support your Association:
>>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>>> Please support them.
>>>>>> _______________________________________________
>>>>>> Public-List mailing list
>>>>>> Public-List at lists.alberg30.org
>>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>>> 
>>>>> _______________________________________________
>>>>> These businesses support your Association:
>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>> Please support them.
>>>>> _______________________________________________
>>>>> Public-List mailing list
>>>>> Public-List at lists.alberg30.org
>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>> 
>>>> --
>>>> Kris Coward                    http://unripe.melon.org/
>>>> GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> 
>>> ------------------------------
>>> 
>>> Subject: Digest Footer
>>> 
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> 
>>> ------------------------------
>>> 
>>> End of Public-List Digest, Vol 4114, Issue 3
>>> ********************************************
>>> 
>> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list