[Public-List] Reproduction Builder's plates

Kris Coward kris at melon.org
Mon Feb 1 14:46:28 PST 2021


I suspect that a one-off (or small batch) may be well within the
capabilities of a decently equipped makerspace; there seem to be plenty
of "brush it on, apply a laser, rinse it off" marking systems for metals
these days, one of which might do the trick, as long as someone's got a
graphics file for it.

-K

On Mon, Feb 01, 2021 at 03:23:44PM -0500, Gordon Laco via Public-List wrote:
> 1,000…. hmmm
> 
> Oh well
> 
> 
> Gordon Laco
> www.gordonlaco.com
> 
> 
> 
> 
> > On Feb 1, 2021, at 3:18 PM, Mike Lehman via Public-List <public-list at lists.alberg30.org> wrote:
> > 
> > Jim and I did this project as a team, I'll check the inventory but I am
> > pretty sure it is depleted. I remember ordering them and may have a record
> > from where in Baltimore. What I distinctly remember was the minimum order
> > was 1,000 plates.
> > 
> > Mike Lehman
> > ~~~_/)_/)~~_/)~~~
> > 
> > 
> > 
> > 
> > On Mon, Feb 1, 2021, 3:13 PM Michael via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > 
> >> Jim Menucci was the ramrod for that offering; he is gone now. I don't
> >> know where his source was.
> >> 
> >> Michael Grosh
> >> #220
> >> 
> >> ------ Original Message ------
> >> From: "Gordon Laco via Public-List" <public-list at lists.alberg30.org>
> >> To: "Alberg 30 Public List -- open to all"
> >> <public-list at lists.alberg30.org>
> >> Cc: "Gordon Laco" <mainstay at csolve.net>
> >> Sent: 2/1/2021 2:44:22 PM
> >> Subject: [Public-List] Reproduction Builder's plates
> >> 
> >>> Hello friends,
> >>> 
> >>> Forgive me if this has been covered already… but are there still
> >> reproduction builder’s plates for our boats available from the Association?
> >>> 
> >>> I’d be interested in one myself… ours has long since had the blue
> >> printing worn off…
> >>> 
> >>> 
> >>> Gordon Laco
> >>> 426 Surprise
> >>> www.gordonlaco.com
> >>> 
> >>> 
> >>> 
> >>> 
> >>> _______________________________________________
> >>> These businesses support your Association:
> >>> http://www.alberg30.org/store/A30supporters.html
> >>> Please support them.
> >>> _______________________________________________
> >>> Public-List mailing list
> >>> Public-List at lists.alberg30.org
> >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >> 
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >> 
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3



More information about the Public-List mailing list