[Public-List] Reproduction Builder's plates

[Andrew Johns]

I would also be interested in a reproduction builders plate.

On Wed, Feb 3, 2021 at 9:50 PM John Irving via Public-List <
public-list at lists.alberg30.org> wrote:

> I’d be interested in a builder’s plate for Scotch Bonnet.  How much are
> they?
>
> > On Feb 3, 2021, at 9:11 PM, Roy Jarnagin via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> > You might check out the site frontpanelexpress.com. I have used them
> to make panels for electronic equipment and have been pleased with the
> results.
> >
> > Roy Jarnagin
> >
> > Southern Serenity #72
> >
> >
> > -----Original Message-----
> > From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
> Behalf Of Kris Coward via Public-List
> > Sent: Wednesday, February 03, 2021 6:25 PM
> > To: Mike Lehman via Public-List <public-list at lists.alberg30.org>
> > Cc: Kris Coward <kris at melon.org>
> > Subject: Re: [Public-List] Reproduction Builder's plates
> >
> >
> > Do you still have the image of the plate that was sent for the previous
> run of them? Possibly also dimensions?
> >
> > In a conversation off-list with a few people who'd expressed interest, I
> brought up having found some good indications that hitting anodized
> aluminum with a CO2 laser (of the sort you can find at most
> hackerspaces/makerspaces, and that a decent assortment of hobbyists also
> have at home) burns off the dye in the anodization, leaving bright (but I
> imagine still anodized) metal.
> >
> > Basically this means that if you've got a suitably sized and coloured
> piece of anodized sheet/plate, and an image file, there's a decent change
> that you can find a hackerspace, makerspace, or hobbyist with a laser and a
> willingness to help you out to make your own plate with no minimum order
> size.
> >
> > I don't know where to find such a laser around the Chesapeake, but for
> Albergers close to Toronto, I know that Hacklab and Site 3 each have such a
> laser, can't quite remember if the Toronto Public Library has one (or if
> they've just got 3d printers), strongly suspect that the Toronto Tool
> Library has one, and I've got some friends around High Park who have one at
> home (and know of 2 more home lasers belonging to friends who live up in
> Deep River). I imagine that they're not that much scarcer around Maryland.
> >
> > Cheers,
> > Kris
> >
> >> On Mon, Feb 01, 2021 at 03:18:50PM -0500, Mike Lehman via Public-List
> wrote:
> >> Jim and I did this project as a team, I'll check the inventory but I
> >> am pretty sure it is depleted. I remember ordering them and may have a
> >> record from where in Baltimore. What I distinctly remember was the
> >> minimum order was 1,000 plates.
> >>
> >> Mike Lehman
> >> ~~~_/)_/)~~_/)~~~
> >>
> >>
> >>
> >>
> >> On Mon, Feb 1, 2021, 3:13 PM Michael via Public-List <
> >> public-list at lists.alberg30.org> wrote:
> >>
> >>> Jim Menucci was the ramrod for that offering; he is gone now. I
> >>> don't know where his source was.
> >>>
> >>> Michael Grosh
> >>> #220
> >>>
> >>> ------ Original Message ------
> >>> From: "Gordon Laco via Public-List" <public-list at lists.alberg30.org>
> >>> To: "Alberg 30 Public List -- open to all"
> >>> <public-list at lists.alberg30.org>
> >>> Cc: "Gordon Laco" <mainstay at csolve.net>
> >>> Sent: 2/1/2021 2:44:22 PM
> >>> Subject: [Public-List] Reproduction Builder's plates
> >>>
> >>>> Hello friends,
> >>>>
> >>>> Forgive me if this has been covered already… but are there still
> >>> reproduction builder’s plates for our boats available from the
> Association?
> >>>>
> >>>> I’d be interested in one myself… ours has long since had the blue
> >>> printing worn off…
> >>>>
> >>>>
> >>>> Gordon Laco
> >>>> 426 Surprise
> >>>> www.gordonlaco.com
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> These businesses support your Association:
> >>>> http://www.alberg30.org/store/A30supporters.html
> >>>> Please support them.
> >>>> _______________________________________________
> >>>> Public-List mailing list
> >>>> Public-List at lists.alberg30.org
> >>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>>
> >>> _______________________________________________
> >>> These businesses support your Association:
> >>> http://www.alberg30.org/store/A30supporters.html
> >>> Please support them.
> >>> _______________________________________________
> >>> Public-List mailing list
> >>> Public-List at lists.alberg30.org
> >>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >>>
> >> _______________________________________________
> >> These businesses support your Association:
> >> http://www.alberg30.org/store/A30supporters.html
> >> Please support them.
> >> _______________________________________________
> >> Public-List mailing list
> >> Public-List at lists.alberg30.org
> >> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > --
> > Kris Coward                    http://unripe.melon.org/
> > GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
> _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>