[Public-List] cutlass housing replacement

Hernán Scarnichia hernanscar at gmail.com
Sun Jan 17 18:00:48 PST 2021


I have an extra housing and stern tube. Not sure if shipping will be
reasonable, where are you located?
Hernan

On Sun, Jan 17, 2021 at 9:36 AM Greg Wallis via Public-List <
public-list at lists.alberg30.org> wrote:

> Hi,
>
> I am in process of replacing the cutlass bearing,
>
> Here's a link to my poor cutlass bearing housing.  Notice the ruined pipe
> threads.
> https://drive.google.com/file/d/198AJ_rMD7Lx8QrdksGXhIbeRR6_FPS9t/view
>
> I took the cutlass bearing housing to a shop to have the new bearing
> pressed in, and they proceeded to overcut the old bearing and cut two deep
> groves lengthwise through the female pipe threads of the cutlass housing.
> These threads connect the cutlass bearing housing to the stern tube.  So
> now the threads are not going to be watertight.  I think that the threads
> will still function, but they will most certainly leak.
>
> I am hoping somebody has an identical alberg30 cutlass bearing housing that
> they'd be willing to sell to me.  This would be the best.
>
> If I can't find another one, I am considering to allow this fitting to leak
> between the stern tube and the cutlass bearing housing.  I think I'd just
> need to ensure that there is plenty of sealant around the outside of stern
> tube where it exits the hull.  I guess some water would accumulate in that
> space and wouldn't really have anywhere to go.
>
> I would also put a generous layer of sealant on the threads themselves, to
> hopefully prevent it from leaking at all.   Doing this is going to make it
> very difficult to remove the cutlass bearing housing in the future.
>
> If you have any suggestions or tricks to make these threads watertight
> again, please do let me know.  How about a thread sealant that would solve
> this problem and still be possible to unscrew in the future?
>
> Ideally though, if you have a cutlass bearing housing you'd be willing to
> part with, please let me know!
>
> Thanks
> Greg
> hull #165
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


More information about the Public-List mailing list