[Public-List] Rudder repair

Winslow Ayer 135sleddinghill at gmail.com
Tue Jun 8 15:06:56 PDT 2021


Really nice job. I can only imagine what it took to complete this project.

Well done,

Winslow #283

> On Jun 8, 2021, at 5:23 PM, Stephen Gwyn via Public-List <public-list at lists.alberg30.org> wrote:
> 
> 
> Here are some pictures from my recent rudder repair:
> 
> https://photos.app.goo.gl/s6QLQJaTxXJA1Qsg9
> 
> There was substantial wear and dezincification in several places.
> 
> In my boat (1972, #495), there are 3 separate parts, much like the diagrams at:
> http://www.alberg30.org/maintenance/Steering/RudderPost/
> 
> The pins coming out the post are soldered in place. They're
> pretty flimsy. For the bottom 2 parts (the mid-point bearing and
> the pin at the foot), they're just there to hold the part to the
> rudder. For the upper rudder stock, the torsional strength (the
> ability to turn the rudder by turning the tiller) comes from the
> fact the piece is bent, not from the pins. In the original version
> the midpoint bearing was offset 1/8" out of column compared to the
> other two parts. I'm guessing this is because it's made out of 3/4"
> stock and whoever built my rudder was having an off day and aligned the
> edges, rather than the centres of the pieces.
> 
> The rudder post had a keyway cut into the shaft below decks, in case the
> wheel steering option was wanted.
> 
> My rudder had a clam shell zinc installed in the middle of the rudder.
> It was through bolted, but not connected to any metal. I'm not sure why it
> was there. It's gone and the hole filled.
> 
> As you can see from the pictures, everything was ground out and
> rebuilt in stainless then glassed back in. The midpoint gudgeons
> and the shoe (which were also worn) had some bronze welded back on
> and then were machined to match the stainless parts.
> 
> George, I would you like to add these pictures to alberg30.org?
> The old bits are sitting on my workbench if you need more pictures.
> I can also write more text if wanted.
> 
> SG
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list