[Public-List] Public-List Digest, Vol 4189, Issue 2

Gordon Laco mainstay at csolve.net
Thu Jun 24 05:39:58 PDT 2021


I did something similar to that in my Folkboat, but used butter on the bolt I wanted to move freely after the epoxy mixture around it cured.  I can report a complete success with twelve years of hard service following the repair, and when I got the boat back after she’d done a trip from Toronto to the Caribbean, my repair was still in perfect condition.

I didn’t know about the graphite filler, and just used the usual brown ‘Filleting’ filler.  I’m sure the graphite is better, but the softer stuff worked too.

Gordon Laco
www.gordonlaco.com





> On Jun 24, 2021, at 8:14 AM, Margaret and Richard Mair via Public-List <public-list at lists.alberg30.org> wrote:
> 
> In 2012 while in the east coast I had a lot of wear on the rudder shoe.
> I replaced the bolt in the bottom of the rudder,cut the head off the bolt
> and put 3 coats of release wax on the bolt.
> I then mixed up west system with a lot of the graphite powder they have and
> bolted the shoe back on. I waited a week to be sure of a full set and then
> moved the rudder. This has held up since and no play in the bottom of the
> rudder. Use since that repair includes a trip up the St Lawrence river.
> Richard. Into The Blue.
> 
> On Wed, Jun 23, 2021 at 7:39 PM <public-list-request at lists.alberg30.org>
> wrote:
> 
>> Send Public-List mailing list submissions to
>>        public-list at lists.alberg30.org
>> 
>> To subscribe or unsubscribe via the World Wide Web, visit
>>        http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> or, via email, send a message with subject or body 'help' to
>>        public-list-request at lists.alberg30.org
>> 
>> You can reach the person managing the list at
>>        public-list-owner at lists.alberg30.org
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Public-List digest..."
>> 
>> 
>> Please do NOT include the entire digest in your reply!
>> ======================================================
>> 
>> 
>> 
>> Today's Topics:
>> 
>>   1. Re: Rudder shoe Hull 103 (Mike Lehman)
>>   2. Re: Rudder shoe Hull 103 (Taft Gerry)
>>   3. Re: Rudder shoe Hull 103 (David Swanson)
>>   4. Re: Rudder shoe Hull 103 (Taft Gerry)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Wed, 23 Jun 2021 16:30:35 -0400
>> From: Mike Lehman <mlehman at gmail.com>
>> To: Alberg 30 Public List -- open to all
>>        <public-list at lists.alberg30.org>
>> Subject: Re: [Public-List] Rudder shoe Hull 103
>> Message-ID:
>>        <
>> CAApdQjpkxsPpx6NLSoTNxkjSOCiQKb3TX-Yxt1nzZgJy-JTn3Q at mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>> 
>> I have a rudder shoe...it belongs to the A30 Association and is reserved
>> for making a mold to allow duplicates to be cast, and is not for sale. On
>> the other hand, I also have a mold for the rudder shoe. If anyone knows of
>> a foundry that is willing to one casting at a time, I am willing to lend
>> the mold provided it is returned to me since it too belongs to the A30
>> Association.
>> 
>> Mike Lehman
>> ~~~_/)_/)~~_/)~~~
>> 
>> 
>> 
>> 
>> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>>> I wonder if they came from Edson in the States as did the other castings?
>>> 
>>> If so, and if you can motivate them to look, they?ll have the original
>>> tooling in their shelves.
>>> 
>>> 
>>> Gordon Laco
>>> 426 Surprise
>>> 
>>> 
>>> 
>>> 
>>> 
>>>> On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> I am looking for a rudder shoe for hull #103.  Any help is appreciated
>>>> 
>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 2
>> Date: Wed, 23 Jun 2021 22:00:20 +0000 (UTC)
>> From: Taft Gerry <gftaft at yahoo.ca>
>> To: Mike Lehman via Public-List <public-list at lists.alberg30.org>
>> Subject: Re: [Public-List] Rudder shoe Hull 103
>> Message-ID: <1206817656.4113499.1624485620266 at mail.yahoo.com>
>> Content-Type: text/plain; charset=UTF-8
>> 
>> Thank you so much Mike.? I am in British Columbia, Canada.? I will see if
>> I can find a foundry.? If not, what is the alternative?? Do you simply get
>> something made out of stainless???
>> I am wondering if you know where I could get the dimensions for the shoe,
>> in the event I need to have one made from stainless.
>>    On Wednesday, June 23, 2021, 01:30:50 p.m. PDT, Mike Lehman via
>> Public-List <public-list at lists.alberg30.org> wrote:
>> 
>> I have a rudder shoe...it belongs to the A30 Association and is reserved
>> for making a mold to allow duplicates to be cast, and is not for sale. On
>> the other hand, I also have a mold for the rudder shoe. If anyone knows of
>> a foundry that is willing to one casting at a time, I am willing to lend
>> the mold provided it is returned to me since it too belongs to the A30
>> Association.
>> 
>> Mike Lehman
>> ~~~_/)_/)~~_/)~~~
>> 
>> 
>> 
>> 
>> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>>> I wonder if they came from Edson in the States as did the other castings?
>>> 
>>> If so, and if you can motivate them to look, they?ll have the original
>>> tooling in their shelves.
>>> 
>>> 
>>> Gordon Laco
>>> 426 Surprise
>>> 
>>> 
>>> 
>>> 
>>> 
>>>> On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> I am looking for a rudder shoe for hull #103.? Any help is appreciated
>>>> 
>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
>> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Wed, 23 Jun 2021 22:55:16 +0000 (UTC)
>> From: David Swanson <zira at bellsouth.net>
>> To: Taft Gerry via Public-List <public-list at lists.alberg30.org>
>> Subject: Re: [Public-List] Rudder shoe Hull 103
>> Message-ID: <255948444.652684.1624488916650 at mail.yahoo.com>
>> Content-Type: text/plain; charset=UTF-8
>> 
>> 
>> Cattail Foundry
>> 
>> Foundry in Lancaster County, PennsylvaniaAddress:?167 W Cattail Rd,
>> Gordonville, PA 17529Hours:?Closed?? Opens 7AM ThuPhone:?(717) 768-7323
>> 
>> |
>> |
>> |  |
>> Cat Tail Foundry - Google Search
>> 
>> 
>> |
>> 
>> |
>> 
>> |
>> 
>> 
>> 
>> 
>> Description
>> 
>> 
>> 
>>    On Wednesday, June 23, 2021, 06:00:28 PM EDT, Taft Gerry via
>> Public-List <public-list at lists.alberg30.org> wrote:
>> 
>>  Thank you so much Mike.? I am in British Columbia, Canada.? I will see
>> if I can find a foundry.? If not, what is the alternative?? Do you simply
>> get something made out of stainless???
>> I am wondering if you know where I could get the dimensions for the shoe,
>> in the event I need to have one made from stainless.
>> ? ? On Wednesday, June 23, 2021, 01:30:50 p.m. PDT, Mike Lehman via
>> Public-List <public-list at lists.alberg30.org> wrote:?
>> 
>> I have a rudder shoe...it belongs to the A30 Association and is reserved
>> for making a mold to allow duplicates to be cast, and is not for sale. On
>> the other hand, I also have a mold for the rudder shoe. If anyone knows of
>> a foundry that is willing to one casting at a time, I am willing to lend
>> the mold provided it is returned to me since it too belongs to the A30
>> Association.
>> 
>> Mike Lehman
>> ~~~_/)_/)~~_/)~~~
>> 
>> 
>> 
>> 
>> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>>> I wonder if they came from Edson in the States as did the other castings?
>>> 
>>> If so, and if you can motivate them to look, they?ll have the original
>>> tooling in their shelves.
>>> 
>>> 
>>> Gordon Laco
>>> 426 Surprise
>>> 
>>> 
>>> 
>>> 
>>> 
>>>> On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> I am looking for a rudder shoe for hull #103.? Any help is appreciated
>>>> 
>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> ?
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
>> 
>> ------------------------------
>> 
>> Message: 4
>> Date: Wed, 23 Jun 2021 23:29:25 +0000 (UTC)
>> From: Taft Gerry <gftaft at yahoo.ca>
>> To: David Swanson via Public-List <public-list at lists.alberg30.org>
>> Subject: Re: [Public-List] Rudder shoe Hull 103
>> Message-ID: <415227976.4147110.1624490965464 at mail.yahoo.com>
>> Content-Type: text/plain; charset=UTF-8
>> 
>> Thank you so much.? I will call them tomorrow morning.
>>    On Wednesday, June 23, 2021, 03:55:19 p.m. PDT, David Swanson via
>> Public-List <public-list at lists.alberg30.org> wrote:
>> 
>> 
>> Cattail Foundry
>> 
>> Foundry in Lancaster County, PennsylvaniaAddress:?167 W Cattail Rd,
>> Gordonville, PA 17529Hours:?Closed?? Opens 7AM ThuPhone:?(717) 768-7323
>> 
>> |
>> |
>> |? |
>> Cat Tail Foundry - Google Search
>> 
>> 
>> |
>> 
>> |
>> 
>> |
>> 
>> 
>> 
>> 
>> Description
>> 
>> 
>> 
>> ? ? On Wednesday, June 23, 2021, 06:00:28 PM EDT, Taft Gerry via
>> Public-List <public-list at lists.alberg30.org> wrote:?
>> 
>> ? Thank you so much Mike.? I am in British Columbia, Canada.? I will see
>> if I can find a foundry.? If not, what is the alternative?? Do you simply
>> get something made out of stainless???
>> I am wondering if you know where I could get the dimensions for the shoe,
>> in the event I need to have one made from stainless.
>> ? ? On Wednesday, June 23, 2021, 01:30:50 p.m. PDT, Mike Lehman via
>> Public-List <public-list at lists.alberg30.org> wrote:?
>> 
>> I have a rudder shoe...it belongs to the A30 Association and is reserved
>> for making a mold to allow duplicates to be cast, and is not for sale. On
>> the other hand, I also have a mold for the rudder shoe. If anyone knows of
>> a foundry that is willing to one casting at a time, I am willing to lend
>> the mold provided it is returned to me since it too belongs to the A30
>> Association.
>> 
>> Mike Lehman
>> ~~~_/)_/)~~_/)~~~
>> 
>> 
>> 
>> 
>> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>>> I wonder if they came from Edson in the States as did the other castings?
>>> 
>>> If so, and if you can motivate them to look, they?ll have the original
>>> tooling in their shelves.
>>> 
>>> 
>>> Gordon Laco
>>> 426 Surprise
>>> 
>>> 
>>> 
>>> 
>>> 
>>>> On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> I am looking for a rudder shoe for hull #103.? Any help is appreciated
>>>> 
>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> ?
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> ?
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
>> 
>> ------------------------------
>> 
>> Subject: Digest Footer
>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
>> 
>> ------------------------------
>> 
>> End of Public-List Digest, Vol 4189, Issue 2
>> ********************************************
>> 
> -- 
> Richard and Margaret
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




More information about the Public-List mailing list