[Public-List] A30 Hull Prismatic Coefficient

David A. Bardsley davebardsley at eastlink.ca
Mon Jun 28 16:00:59 PDT 2021


   Gordon,
   Thanks for the pointer.
   I've removed the PO's vetus diesel and am installing a 10kW electric
   drive with a completely new transmission.  I'm free to pick an
   arbitrary ratio to maximize (hopefully) the performance of my 2 blade
   13-8 prop.
   As you can imagine I'vd been spending a lot of time at Google
   University and on the vic prop calculator!
   Dave
   Ginseng 574

   On Jun 28, 2021 19:47, Gordon Laco <mainstay at csolve.net> wrote:

   Check out Skene’s Elements of Yacht Design.  There will be information
   there to allow you to make a good estimate.
   I reckon you already know that if your boat has an Atomic IV, it has
   direct 1:1 drive.
   Gordon Laco
   426 Surprise
   [1]www.gordonlaco.com

   On Jun 28, 2021, at 6:44 PM, David A. Bardsley via Public-List
   <[2]public-list at lists.alberg30.org> wrote:

     I'm designing my drive's reduction ratio and the resource at my
     disposal requires our A30's prismatic coefficient as a part of the
   drag
     calculation.
     Can anyone share a decent figure for our craft?
     Dave
     Ginseng 574
   _______________________________________________
   These businesses support your Association:
   [3]http://www.alberg30.org/store/A30supporters.html
   Please support them.
   _______________________________________________
   Public-List mailing list
   Public-List at lists.alberg30.org
   http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

References

   1. http://www.gordonlaco.com/
   2. mailto:public-list at lists.alberg30.org
   3. http://www.alberg30.org/store/A30supporters.html



More information about the Public-List mailing list