[Public-List] LED conversions

[Kris Coward]

Also worth checking the amps you're going to be drawing in the first
place; 1A is usually enough. I went with the regulator that I did
because the drop-out voltage was low enough that I could still
realistically expect the lights to get 12V out of any normally
encountered supply voltage from the DV system. If you do need 2A, I
_think_ they can be paralleled pretty safely.

-K

On Sat, Mar 13, 2021 at 02:48:39AM +0300, Rod via Public-List wrote:
> 
> A good tip, Kris.  Something to add to my LED conversions.  Digikey.ca shows that item as obsolete but they did show NJM2388F12 but that has only a 1 amp rating.   Maybe there is something else available with your 2 amp rating. 
> --
> Cheers,   Rod
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3