[Public-List] Gray Marine transmission slipping

[gdinwiddie at alberg30.org]

Christian,

That looks very similar to an Atomic 4 transmission. If you back out the 
lock screw seen on the second photo, turn the notched adjusting ring 
(only one notch--2 will be too much), and then tighten back the lock 
screw, it should provide more pressure to the clutch disks.

  - George

On 8/2/22 2:13 PM, Christian Douglas via Public-List wrote:
> Has anyone adjusted their transmission? With increased throttle the clutch
> seems to slip and engine races. Based on a little digging I was assuming
> the adjusting bolt would look like it was going into the clutch discs.
> Here are four pics with 1/4 turn between.
> 
> https://imgur.com/a/Ktg4eRh
> 
> Christian
> Kittiwake #76

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------