[Public-List] Sanding the reverse (concave) curve where the keel and hull meet

[Winslow Ayer]

Yes, a 5”-6" random orbital sander will work fine. They make soft bases that fit most brands and have more flex and give to them. Use them lightly at aa angle so it doesn’t dig in.

Winslow
Tinkers Damn #283

> On Feb 6, 2022, at 2:13 PM, George Dinwiddie via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Jonathan,
> 
> I use my 6" RA sander held lightly and at an angle to fit.
> 
> - George
> 
> On 2/6/22 8:53 AM, Jonathan Bresler via Public-List wrote:
>> Folks,
>> When sanding the hull to remove old paint, how do you sand the reverse
>> (concave) curve where the keel meets the hull of an Alberg 30?
>> Currently using a 5" DA sander to remove paint from the hull and keel. The
>> sander does not fit into the reverse curve.
>> All the best,
>> Jonathan
> 
> -- 
> ----------------------------------------------------------------------
>  When I remember bygone days                         George Dinwiddie
>  I think how evening follows morn;            gdinwiddie at alberg30.org
>  So many I loved were not yet dead,           http://www.Alberg30.org
>  So many I love were not yet born.                          also see:
>               'The Middle' by Ogden Nash     http://idiacomputing.com
> ----------------------------------------------------------------------
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

Winslow Ayer
135sleddinghill at gmail.com