[Public-List] Twist lock eyelet hole cutter

[Rolph Townshend]

I have a tool for cutting the hole for a grommet. It cuts a small round
hole about 3/8 diameter. You are welcome to it if you think it will do what
you need. BUT - Give me time to find it. Let me know if you want it, then I
will look for it.
Towney

On Thu, Feb 16, 2023 at 7:44 AM Mike Lehman via Public-List <
public-list at lists.alberg30.org> wrote:

> I didn't even know that such a tool existed
>
> On Thu, Feb 16, 2023 at 12:23 AM Christian Douglas via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > Trying to finish my mainsail cover. Does anyone in the DC Metro area
> have a
> > twist lock eyelet hole cutter I could borrow? I know it’s possible to cut
> > the slits and holes without it, but having done that once, it’d be much
> > easier with the proper tool.
> >
> > This is the tool.
> > https://www.sailrite.com/Common-Sense-Eyelet-Hole-Cutter
> >
> > Christian
> > Kittiwake #76
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> --
> Mike Lehman
> ~~~_/)_/)~~_/)~~~
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>