[Public-List] Fuel filler corrosion?

[Glenn Brooks]

Wire brush it off. Put a couple of drops of oil on the threads. Screw it back in and see how it does. The corrosion is simply gumming up the threads and imparting resistance to removing the cap. A bit of lubricant now and then should work wonders.  

Sent from my iPhone

> On Jul 1, 2023, at 11:26 AM, Mike Lehman via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Try Z cleaner, available at Bacon's
> 
>> On Sat, Jul 1, 2023, 12:59 PM Christian Douglas via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>> Can this be cleaned up or do I need to replace it? Had a tough time getting
>> the cap unscrewed.
>> 
>> https://imgur.com/a/1ZjhpdL
>> 
>> Christian
>> Kittiwake #76
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org