[Public-List] Fuel filler corrosion?

[Michael Connolly]

Christian,
Put it in a glass jar with household vinegar over night. In the morning brush off the corrosion.  You can do the same with the filler neck.  Plug the hose with paper towling and wet the threads with vinegar and use a wire brush to scrub off the corrosion. Vacuum out the debris. Coat both with Boeshield T-9 when assembling. Should be fine. Pic looks like Zinc diecast which is junk.  If it is bronze chrome plated then you are good to go.
Michael
> On 07/01/2023 12:58 PM EDT Christian Douglas via Public-List <public-list at lists.alberg30.org> wrote:
> 
>  
> Can this be cleaned up or do I need to replace it? Had a tough time getting
> the cap unscrewed.
> 
> https://imgur.com/a/1ZjhpdL
> 
> Christian
> Kittiwake #76
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org