[Public-List] Tiller dimensions, especially width

[gdinwiddie at alberg30.org]

Wade, if you're talking about the H-fitting being loose on the tiller 
head on the rudder post, then the "ears" have probably bent inwards. 
This is a common problem with the Edson tiller heads.

https://alberg30.org/maintenance/Steering/TillerHead.html

  - George

On 6/4/23 8:19 PM, Wade Wall via Public-List wrote:
> Hi all,
> 
> Does anyone have the dimensions for their tiller? I am not currently at my
> boat, but measurements for an old tiller are 1.5 width, 2" height, 50 "
> length, and 7.5 " rise. The tiller hardware looks to be original. It sits
> loose on the post, so I have to use some washers to keep it tight. Does
> this sound about right?
> 
> Wade Wall
> Sophie #421

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------