[Public-List] Antifoul vs zinc for prop

[Jonathan Bresler]

Have not tried anti-foul on the prop.
Have always used Rustoleum Cold Galvanizing Spray Paint
https://www.rustoleum.com/product-catalog/consumer-brands/stops-rust/cold-galvanizing-compound-spray
Seems to work well enough.
Over the course of two years between haul outs of the boat the two coats
remain but are worn and pitted

Jonathan

On Sun, Apr 7, 2024 at 7:49 PM Jay Davenport via Public-List <
public-list at lists.alberg30.org> wrote:

> I have found that a can of spray zinc from the hardware store works well
> on the prop. Before applying, clean the prop with acetone.
> Jay
>
>
>
>
>
>     On Sunday, April 7, 2024 at 07:21:54 PM EDT, Meredith Glacken via
> Public-List <public-list at lists.alberg30.org> wrote:
>
>  Would love to hear some opinions from this group on antifoul vs zinc
> paint for the prop.  I’ve also been under the impression that you can’t
> really do both, but would love to be wrong.  What’s everyone like to do?
>
> -Meredith
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


-- 
Jonathan M Bresler
S/V Constance Alberg 30 #262
Annapolis/Eastport MD