<HTML>
I think I am going to look at an RV type table base set <U>under</U> the
cabin sole with a table post that can set in it through a hole & be
removed. I'll try this in a piece of plywood temporarily replacing one
of the hatches to the battery compartments. This eliminates any bump on
the cabin sole (not having the table everyone is describing) and I will
build a table that has a narrow center strip to which fiddled leaves are
hinged, port & starboard with braces to hold them in the up position,
like the table on my old Tancook schooner. Can put a plug in the hole when
not in use.
<P>
- Gordon White A-275</HTML>