<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2653.12">
<TITLE>RE: Public-list digest, Vol 1 #291 - 8 msgs</TITLE>
</HEAD>
<BODY>
<BR>
<P><FONT SIZE=2>www.moyermarine.com</FONT>
</P>
<P><FONT SIZE=2>Message: 8</FONT>
<BR><FONT SIZE=2>From: "Furey, Bill (CORP)" <bill.furey@corporate.ge.com></FONT>
<BR><FONT SIZE=2>To: "'public-list@alberg30.org'" <public-list@alberg30.org></FONT>
<BR><FONT SIZE=2>Subject: RE: [Alberg30] carburetor</FONT>
<BR><FONT SIZE=2>Date: Mon, 16 Jul 2001 14:17:11 -0400</FONT>
<BR><FONT SIZE=2>Reply-To: public-list@alberg30.org</FONT>
</P>
<P><FONT SIZE=2>I have the same problem on an Atomic 4 with a realtively new facet(moyer's)</FONT>
<BR><FONT SIZE=2>fuel pump.</FONT>
<BR><FONT SIZE=2>The pump sems to flood the carb. If I run the pump prior to starting, & then</FONT>
<BR><FONT SIZE=2>disconnect</FONT>
<BR><FONT SIZE=2>rthe pump, the engine runs fine, until I connect the pump while the engione</FONT>
<BR><FONT SIZE=2>is running</FONT>
<BR><FONT SIZE=2>& it floods the carb & start to stall. </FONT>
<BR><FONT SIZE=2> </FONT>
<BR><FONT SIZE=2>Can you give me Don Moyer's web site address?</FONT>
<BR><FONT SIZE=2> </FONT>
<BR><FONT SIZE=2>Thks, W. Furey</FONT>
</P>
</BODY>
</HTML>