<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Mike this is wonderful - I take it the measurements 
are in foot pounds?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Hope everyone had a great Christmas/Festive 
season.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>John</FONT></DIV>
<BLOCKQUOTE 
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV 
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> 
  <A href="mailto:sail_505@hotmail.com" title=sail_505@hotmail.com>Mike 
  Lehman</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A 
  href="mailto:public-list@alberg30.org" 
  title=public-list@alberg30.org>public-list@alberg30.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, December 27, 2001 8:15 
  AM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [Alberg30] tunning, shroud 
  tension</DIV>
  <DIV><BR></DIV>
  <DIV>
  <DIV>
  <P><BR><BR></P></DIV>
  <DIV></DIV><BR><BR><BR>Mike Lehman 
  <DIV></DIV>"Gilleleje" #505 
  <DIV></DIV>(410) 544-9067 
  <DIV></DIV>
  <DIV>
  <DIV></DIV>
  <P>I couldn't find the refernce to the member list topic. Generally what I 
  have found is to set the mast as far forward on the base as possible, This 
  positions the mast over the beam better. Tighten the upper shrouds to equal 
  tension keeping the top directly over the base (this takes some practice). A 
  trick is to use the main halyard, moving it from port to starboard and 
  measuring lining it up with a fixed object on the deck, such as turnbuckle. 
  This will help you keep the mast plumb, side-to-side. (a word of caution: on 
  Carnival Lady US17 the mast leaned to one side after this proceedure and Phil 
  Beigel had a hard time figuring out why, until he pulled the boat and measured 
  from the bottom of the keel to the toe rail on each side...one side was 3" 
  higher than the other side! US17 was one of the original boat and a lot of 
  things were done by hand) Now that you have equal tension on the uppers and 
  the head of the mast is directly over the base, tighen the forward lowers 
  until! there is 4-6" prebend at the spreaders (you are actually pulling the 
  center of the mast forward at the spreaders with the forward lowers). Finally 
  tighten the aft lowers just enoug to take the slop out. Attached is a a 
  speadsheet that has the tensions recorded of several boats. The variance is so 
  great boat-to-boat that it is hard to make sense of this without knowing the 
  individual boats and how they perform. Racing boats are indicated by an "R" 
  and generally carry a taughter rig. Hope this helps, at least it's something 
  to ponder over the cold winter months.<BR><BR></P></DIV>
  <DIV></DIV>
  <DIV></DIV><BR><BR><BR>Mike Lehman 
  <DIV></DIV>
  <DIV></DIV>"Gilleleje" #505 
  <DIV></DIV>
  <DIV></DIV>(410) 544-9067 
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>----Original Message Follows---- 
  <DIV></DIV>
  <DIV></DIV>From: Brian and Elaine Timmins <TIMMINS@OPTONLINE.NET>
  <DIV></DIV>
  <DIV></DIV>Reply-To: public-list@alberg30.org 
  <DIV></DIV>
  <DIV></DIV>To: public-list@alberg30.org 
  <DIV></DIV>
  <DIV></DIV>Subject: Re: [Alberg30] tunning, shroud tension 
  <DIV></DIV>
  <DIV></DIV>Date: Wed, 26 Dec 2001 21:41:14 -0500 
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>Check members list, May 1 (digest of May 2), 2001 
  <DIV></DIV>
  <DIV></DIV>Topic.... "Alberg 30 Tensions" 
  <DIV></DIV>
  <DIV></DIV>I used this as a guideline when tuning my boat this past season. It 
  worked 
  <DIV></DIV>
  <DIV></DIV>VERY WELL!!! 
  <DIV></DIV>
  <DIV></DIV>I ended up 1st in class under PHRF in my club. Also had highest 
  point count 
  <DIV></DIV>
  <DIV></DIV>of the entire fleet. Admittedly we're a small group of freindly 
  racers, not 
  <DIV></DIV>
  <DIV></DIV>grand prix. 
  <DIV></DIV>
  <DIV></DIV>Regards, 
  <DIV></DIV>
  <DIV></DIV>Brian #497 
  <DIV></DIV>
  <DIV></DIV>----- Original Message ----- 
  <DIV></DIV>
  <DIV></DIV>From: <JPGRATHWOL@AOL.COM>
  <DIV></DIV>
  <DIV></DIV>To: <MEMBER-LIST@ALBERG30.ORG>
  <DIV></DIV>
  <DIV></DIV>Cc: <PUBLIC-LIST@ALBERG30.ORG>
  <DIV></DIV>
  <DIV></DIV>Sent: Wednesday, December 26, 2001 5:37 PM 
  <DIV></DIV>
  <DIV></DIV>Subject: [Alberg30] tunning, shroud tension 
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>> In the two summers I have sailed my A30 I have focused on 
  things other 
  <DIV></DIV>
  <DIV></DIV>than tuning and shroud tension. I have sailed with a straight up 
  mast, 
  <DIV></DIV>
  <DIV></DIV>"tight" uppers and slightly "looser" lowers. I am speaking 
  "loosely" of 
  <DIV></DIV>
  <DIV></DIV>course. I have managed to maintain a helm that is nicely balanced 
  when even 
  <DIV></DIV>
  <DIV></DIV>heeled and turns strongly to windward when healing angle is 
  increased. And 
  <DIV></DIV>
  <DIV></DIV>I am naturally happy with these results. 
  <DIV></DIV>
  <DIV></DIV>> 
  <DIV></DIV>
  <DIV></DIV>> Sometimes when sailing to windward I feel I am not performing 
  as well as I 
  <DIV></DIV>
  <DIV></DIV>should, not pointing as high nor making the speed I should. My main 
  sail 
  <DIV></DIV>
  <DIV></DIV>seems very full also, too full--slot choking full, as if it were 
  cut for a 
  <DIV></DIV>
  <DIV></DIV>mast with some fore aft pre-bend tuned into it. Sailing with a 
  relatively 
  <DIV></DIV>
  <DIV></DIV>less experienced crew (my wife) and without another A30 as a pace 
  boat, it 
  <DIV></DIV>
  <DIV></DIV>has been difficult to answer my own performance questions. (My 
  sails aren't 
  <DIV></DIV>
  <DIV></DIV>brand new nor are they blown out--at least from a 
  non-top-of-the-fleet 
  <DIV></DIV>
  <DIV></DIV>racing point of view). 
  <DIV></DIV>
  <DIV></DIV>> 
  <DIV></DIV>
  <DIV></DIV>> What I'd like to know is whether a straight mast is the 
  standard. Or is 
  <DIV></DIV>
  <DIV></DIV>it common for A30s to tune the mast with a small 4"-6" fore-aft 
  prebend in 
  <DIV></DIV>
  <DIV></DIV>it, as I often see in other keelboats. Second what range of 
  tensions are 
  <DIV></DIV>
  <DIV></DIV>common among racers and cruisers. I don't have, nor do I plan to 
  get soon, 
  <DIV></DIV>
  <DIV></DIV>an adjustable backstay. If anyone has any thoughts to offer on 
  these 
  <DIV></DIV>
  <DIV></DIV>questions I'd appreciate it. (Also I have an older boat, #88, and 
  have 
  <DIV></DIV>
  <DIV></DIV>already had my mast beam reinforced. While I'm not looking to drive 
  the 
  <DIV></DIV>
  <DIV></DIV>mast down through the deck, I don't think planning my sailing 
  around a 
  <DIV></DIV>
  <DIV></DIV>weakness that can be repaired if it reappears is this way to go 
  either.) 
  <DIV></DIV>
  <DIV></DIV>> 
  <DIV></DIV>
  <DIV></DIV>> I think I saw some time back an informal survey complied by 
  Mike Lehman of 
  <DIV></DIV>
  <DIV></DIV>various boat's shroud tension(s). I can't find this anywhere in the 

  <DIV></DIV>
  <DIV></DIV>archive. Does anyone remember when or where this information is 
  archived? 
  <DIV></DIV>
  <DIV></DIV>Or Mike do you still have this info? In a form that can be posted? 
  <DIV></DIV>
  <DIV></DIV>> 
  <DIV></DIV>
  <DIV></DIV>> Thanks 
  <DIV></DIV>
  <DIV></DIV>> 
  <DIV></DIV>
  <DIV></DIV>> John Grathwol 
  <DIV></DIV>
  <DIV></DIV>> Dovekei #88 
  <DIV></DIV>
  <DIV></DIV>> +-------------------------------------------------+ 
  <DIV></DIV>
  <DIV></DIV>> | Cheap magazine subscriptions. Large selection. | 
  <DIV></DIV>
  <DIV></DIV>> | http://www.alberg30.org/store/magazines.html | 
  <DIV></DIV>
  <DIV></DIV>> +-------------------------------------------------+ 
  <DIV></DIV>
  <DIV></DIV>> 
  <DIV></DIV>
  <DIV></DIV>> _______________________________________________ 
  <DIV></DIV>
  <DIV></DIV>> Public-list mailing list -- Public-list@alberg30.org 
  <DIV></DIV>
  <DIV></DIV>> http://www.alberg30.org/mailman/listinfo/public-list 
  <DIV></DIV>
  <DIV></DIV>> To unsubscribe: email to Public-list-request@alberg30.org 
  <DIV></DIV>
  <DIV></DIV>> Include command "unsubscribe <PASSWORD>" in subject or body. 
  <DIV></DIV>
  <DIV></DIV>> Use command "help" for more options. 
  <DIV></DIV>
  <DIV></DIV>> 
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>+-------------------------------------------------+ 
  <DIV></DIV>
  <DIV></DIV>| Cheap magazine subscriptions. Large selection. | 
  <DIV></DIV>
  <DIV></DIV>| http://www.alberg30.org/store/magazines.html | 
  <DIV></DIV>
  <DIV></DIV>+-------------------------------------------------+ 
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>_______________________________________________ 
  <DIV></DIV>
  <DIV></DIV>Public-list mailing list -- Public-list@alberg30.org 
  <DIV></DIV>
  <DIV></DIV>http://www.alberg30.org/mailman/listinfo/public-list 
  <DIV></DIV>
  <DIV></DIV>To unsubscribe: email to Public-list-request@alberg30.org 
  <DIV></DIV>
  <DIV></DIV>Include command "unsubscribe <PASSWORD>" in subject or body. 
  <DIV></DIV>
  <DIV></DIV>Use command "help" for more options. 
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV>
  <DIV></DIV></DIV><BR clear=all>
  <HR>
  Send and receive Hotmail on your mobile device: <A 
  href="http://go.msn.com/bql/hmtag2_etl_EN.asp">Click 
Here</A><BR></BLOCKQUOTE></BODY></HTML>