<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><SPAN class=510351703-29072002><FONT color=#0000ff>Greetiings Bill:  
The step in the "bridge deck " was originally intended for a box compass.  
My boat OWLET # 605 in fact had a hinged lid that covered this step.  It is 
a lousy position for a compass because it is too close to the engine.  As 
one gets older it surely is a great step as you climb into the companionway 
whose threshold is typically quite high as in all North Sea design boats.I 
mounted my compass on the starboard cockpit bulkhead and find that to be a very 
good position.  Some have mounted the compass on a hinged board that swings 
out into the companionway or back in behind the bulkhead out of the way when not 
needed.  The main thing is to avoid being too close to any metal mass and 
wiring that will affect the deviation of the compass.</FONT></SPAN></DIV>
<DIV><SPAN class=510351703-29072002><FONT color=#0000ff>Welcome to the wonderful 
world of the Alberg.</FONT></SPAN></DIV>
<DIV><SPAN class=510351703-29072002><FONT color=#0000ff>Yours Aye, Doug Wight, 
"Owlet".</FONT></SPAN></DIV>
<BLOCKQUOTE dir=ltr 
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px solid; MARGIN-RIGHT: 0px">
  <DIV class=OutlookMessageHeader><FONT size=2>-----Original 
  Message-----<BR><B>From:</B> public-list-admin@alberg30.org 
  [mailto:public-list-admin@alberg30.org]<B>On Behalf Of</B> R.C. 
  Alley<BR><B>Sent:</B> 28-Jul-02 8:37 PM<BR><B>To:</B> 
  public-list@alberg30.org<BR><B>Subject:</B> Re: [Alberg30] Rookie 
  questions<BR><BR></FONT></DIV>
  <DIV><FONT face=Arial>Some answers, perhaps:</FONT></DIV>
  <DIV><FONT face=Arial></FONT> </DIV>
  <DIV><FONT face=Arial>Para. 1.  The original interior finish  was 
  not carpet.  Remove, sand, and paint with a 1 or 2 part epoxy. (or a 
  marine enamel) Many of the boats were painted  by owners with a 
  latex of some sort, which eventually fails, or grows mildew, or both. The 
  seats and seat backs are plywood, as is the Vberth. Mine were apparently white 
  as supplied from the factory  (#219).</FONT></DIV>
  <DIV><FONT face=Arial></FONT> </DIV>
  <DIV><FONT face=Arial>Para 2: there is some debate in regard to the purpose of 
  the "<FONT size=2>little compartment just aft of the companionway."  
  I</FONT><FONT size=3> think it was originally intended as a step, for which 
  purpose it would be a fine ankle breaker in a seaway.  No compass was 
  supplied with the boats originally, so the builder's intent is not known. It 
  is commonly used as a compass mount, or a mount for a handheld GPS.  I 
  would bet that most don't use it for anything.....</FONT></FONT></DIV>
  <DIV><FONT face=Arial></FONT> </DIV>
  <DIV><FONT face=Arial>Para 3: I have no idea. Mine have been replaced, as have 
  most.</FONT></DIV>
  <DIV><FONT face=Arial></FONT> </DIV>
  <DIV><FONT face=Arial>Para 4: A Microwave?? For god's sake, don't tell my 
  wife!!  (and where did they put the extra batteries???)</FONT></DIV>
  <DIV><FONT face=Arial></FONT> </DIV>
  <DIV><FONT face=Arial>There is at least one other Alberg  (or there was 
  last year) in Solomons--at the Naval Rec center.</FONT></DIV>
  <DIV><FONT face=Arial>I am about 13 mi. north at Flag Harbor.  I can meet 
  you for a boat tour sometime after work or on a weekend.  It may 
  help.</FONT></DIV>
  <DIV><FONT face=Arial></FONT> </DIV>
  <DIV><FONT face=Arial>Rob</FONT></DIV>
  <DIV>----- Original Message ----- </DIV>
  <BLOCKQUOTE dir=ltr 
  style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
    <DIV 
    style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> 
    <A title=mabwjm@starpower.net href="mailto:mabwjm@starpower.net">Mary & 
    Bill Mahony</A> </DIV>
    <DIV style="FONT: 10pt arial"><B>To:</B> <A title=public-list@alberg30.org 
    href="mailto:public-list@alberg30.org">public-list@alberg30.org</A> </DIV>
    <DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, July 28, 2002 7:25 
    PM</DIV>
    <DIV style="FONT: 10pt arial"><B>Subject:</B> [Alberg30] Rookie 
    questions</DIV>
    <DIV><FONT face=Arial></FONT><FONT face=Arial></FONT><BR></DIV>
    <DIV><FONT face=Arial size=2>As I mentioned earlier this week, we just 
    acquired hull #276.  She's currently on blocks down at Solomon's 
    getting some survey-identified work done prior to launching.  I took my 
    wife down to see her for the first time today (did I mention we bought her 
    sight-unseen via the net?).  As we went through the boat, a couple 
    areas caught our attention that I wanted to ask your thoughts 
    on:</FONT></DIV>
    <DIV><FONT face=Arial size=2></FONT> </DIV>
    <DIV><FONT face=Arial size=2>1.  We removed some carpeting lining the 
    hull from the interior under the hanging cabinets in the salon and behind 
    the settees....the removal left some foam backing and glue residue on the 
    interior hull.  I'm thinking the right answer is just to sand the foam 
    and glue remnants down (there's also some deteriorated finish on the 
    interior glass) and repaint.  Any advice concerning how to sand and 
    what to use to repaint?  Was this finish done in plain interior white 
    in the boats as they came off the line?</FONT></DIV>
    <DIV><FONT face=Arial size=2></FONT> </DIV>
    <DIV><FONT face=Arial size=2>2.  The boat has no compass...is there a 
    recommendation for a compass?   Is the little compartment just aft 
    of the companionway the preferred location?</FONT></DIV>
    <DIV><FONT face=Arial size=2></FONT> </DIV>
    <DIV><FONT face=Arial size=2>3.  The cockpit seat locker panels are 
    deteriorated...any info on what kind of wood these were originally?  
    Also, the cockpit access hatch to the ice box is deteriorated.  I 
    noticed a Styrofoam backing, also looking pretty sad--any suggestions for 
    upgrades?</FONT></DIV>
    <DIV><FONT face=Arial size=2></FONT> </DIV>
    <DIV><FONT face=Arial size=2>4.  Previous owners had wedged a 
    microwave into the aft starboard salon overhead cabinet.  We don't 
    want/need the appliance, and since the cabinet space is already cut 
    away, I'm thinking of crafting a cabinet ala Carina Vela as a Nav station in 
    this space--any pros or cons?</FONT></DIV>
    <DIV><FONT face=Arial size=2></FONT> </DIV>
    <DIV><FONT face=Arial size=2>Apologies for the litany of questions...maybe a 
    precursor of more to come!  ;-)</FONT></DIV>
    <DIV><FONT face=Arial size=2>Thanks, Bill</FONT></DIV>
    <DIV><FONT face=Arial 
size=2></FONT> </DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>