<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>RE: [Alberg30] Fasteners</title></head><body>
<div>re my earlier post - there are a variety of sizes of Robertson -
some with not much difference in size. If you are having a problem
with stripping the screw, get the next larger size.</div>
<div><br></div>
<div>Wally</div>
<div><br></div>
<blockquote type="cite" cite><font face="Arial" size="-1"
color="#0000FF">Home Depot has the bits, I just purchased a
package last week. The replacement screws are available from Jamestown
Dist in Bristol, RI or a local marine supplier. I generally use a ice
pick to clean the head prior to removal otherwise the bronze head will
strip with the bit.</font></blockquote>
<blockquote type="cite" cite> </blockquote>
<blockquote type="cite" cite><font face="Arial" size="-1"
color="#0000FF">Stephen</font><br>
<blockquote><font size="-1">-----Original Message-----<br>
<b>From:</b> Mary & Bill Mahony [mailto:mabwjm@starpower.net]<br>
<b>Sent:</b> Monday, August 05, 2002 6:23 PM<br>
<b>To:</b> public-list@alberg30.org<br>
<b>Subject:</b> [Alberg30] Fasteners</font><br>
<font size="-1"></font></blockquote>
<blockquote><font face="Arial" size="-1">What kind of fastener is used
in the Alberg 30 for securing woodwork, wood trim, stove, etc.?
Is it a screw or rivet? It looks like a screwhead with a single
square slot--I'm not familiar with this type of screw or the
name of the bit one would use to
tighten/loosen.</font></blockquote>
<blockquote> </blockquote>
<blockquote><font face="Arial" size="-1">Thanks!</font></blockquote>
</blockquote>
<div><br></div>
<div><br></div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div>The gods do not deduct from man's allotted span the hours spent
in sailing. Anon<br>
www.georgianbaysailing.ca for interesting reading for sailors</div>
</body>
</html>